|
|
Post by millsc on Aug 20, 2013 14:48:34 GMT -5
Taking the plastic off was a no go the floorboard and middle step over piece were all one piece, couldn't get to the screws they were blocked by the frame, so i pulled the motor. Will report when its all done  Attachments:
|
|
|
|
Post by scootnwinn on Aug 20, 2013 16:12:35 GMT -5
Valve adjustments will be interesting won't they?? Can you at least access the carb when it's in there??
|
|
|
|
Post by millsc on Aug 20, 2013 16:21:42 GMT -5
Motor is out on the ground
|
|
|
|
Post by sailracer on Aug 20, 2013 16:32:29 GMT -5
Does the center stand stay on the frame? that's a plus if it does. makes putting it back in easier
|
|
|
|
Post by millsc on Aug 20, 2013 17:12:46 GMT -5
yes center stand is on the frame not the motor
|
|
|
|
Post by sailracer on Aug 20, 2013 17:18:34 GMT -5
[replyingto=millsc]millsc[/replyingto]I like that.. the scooter stands on it's own without the motor.So how's the mods progressing?
|
|
|
|
Post by millsc on Aug 20, 2013 17:20:36 GMT -5
Ill be done in about an hour gotta tune and all that
|
|
|
|
Post by pmatulew on Aug 20, 2013 17:27:09 GMT -5
The Znen is like that. Only way to get floor off is to pull the front cowl and then the inner cowl. It's quicker just to drop the motor.
|
|
|
|
Post by scootnwinn on Aug 20, 2013 17:44:49 GMT -5
Motor is out on the ground yes I see that I meant in the future for maintenance assuming you can get her to run  |
|
|
|
Post by millsc on Aug 20, 2013 17:47:30 GMT -5
Gotta drop the motor just to adjust valves no clearance otherwise
|
|
|
|
Post by scootnwinn on Aug 20, 2013 17:49:40 GMT -5
Bummer that scoot is off my list now.
|
|
|
|
Post by millsc on Aug 20, 2013 20:49:01 GMT -5
its running had a few issues, the ported head had different size exhaust studs so had to use the stock head, guess i'll change it when i have to adjust valves  it seems lean with the 110 jet and 60mm kit and uni so i have more tuning to do. Hard part is over  |
|
|
|
Post by millsc on Aug 20, 2013 22:31:56 GMT -5
upjetted to a 115 its pretty much tuned in few a/f adjustment and needle adjusting and it will be perfect, quite a bit more power even without the ported head |
|
|
|
Post by millsc on Aug 20, 2013 23:38:53 GMT -5
it still sounds lean with 115 and plug is white, so i'll go up to 120 in the morning, it will be all tuned in tomorrow |
|
|
|
Post by onewheeldrive on Aug 20, 2013 23:59:52 GMT -5
Cool hopefully that's the magic number.
|
|
jet
