|
|
Post by jjoshua20213 on Aug 8, 2013 18:27:58 GMT -5
|
|
|
|
Post by millsc on Aug 8, 2013 18:33:35 GMT -5
no need for the 24mm carb without a big valve ported head
|
|
|
|
Post by jjoshua20213 on Aug 8, 2013 20:35:13 GMT -5
I know, I just found one for 35 and they normally run for around 80-up. I just wanted to know if it would fit
|
|
|
|
Post by millsc on Aug 8, 2013 22:19:25 GMT -5
24mm carbs are under 30 bucks on ebay and they work fine but once again no need without the head
|
|
|
|
Post by skuttadawg on Aug 8, 2013 23:21:20 GMT -5
Too big of a carb without large valve head that is ported and a sporty exhaust would not perform good . A buddy bought a Gran Torino with a 351 Cleveland and it has a 2bl carb . He bought and Edelbrock intake and a Holley 750 double pumper . Yes it had more pep but sucked gas and had a huge vacuum noise since he did not have a hot rod cam etc . I got hime to get a 600cfm Edelbrock carb and wow it was amazing how much better it ran . The suggested head is on the top of this page www.scrappydogscooters.com/139QMB_50cc_Performance.html |
|
|
|
Post by millsc on Aug 8, 2013 23:36:51 GMT -5
I've tried all this stuff and I know what works and what don't save your money
|
|
