New Rider
Currently Offline
Posts: 19
Likes: 0
Joined: Jul 17, 2013 22:16:37 GMT -5
|
Post by jtgolden on Aug 6, 2013 14:29:28 GMT -5
I ordered a bbk for 50cc gy6 and the intake valve was bent so the guy I purchased from sent me a replacement intake valve and I guess I have to install it. I can't find any how to's online. Anyone done this before or know how to? Thanks!
|
|
|
|
Post by jeepsteve92xj on Aug 6, 2013 14:46:41 GMT -5
|
|
New Rider
Currently Offline
Posts: 19
Likes: 0
Joined: Jul 17, 2013 22:16:37 GMT -5
|
Post by jtgolden on Aug 6, 2013 15:00:51 GMT -5
Thank you I found it!
|
|
|
|
Post by pmatulew on Aug 6, 2013 17:08:33 GMT -5
Getting the keepers out is easy. Just lean down on it, and then release, and they pop right out. Getting them back in is more tricky.
Word of advice: Clean up your work area ahead of time because when those keepers go flying because they didn't seat right, you're going to have a hard enough time trying to find them.
|
|
New Rider
Currently Offline
Posts: 19
Likes: 0
Joined: Jul 17, 2013 22:16:37 GMT -5
|
Post by jtgolden on Aug 6, 2013 23:23:41 GMT -5
Thanks for the tip much appreciated! ;o
|
|
|
|
Post by rockynv on Aug 7, 2013 4:32:20 GMT -5
Be sure to lap the valve to the valve seat before you reassemble it being carfull to clean up any residue from the lapping compound before you put it all back together.
|
|
