New Rider
Currently Offline
Posts: 48
Likes: 0
Joined: Jun 14, 2013 0:12:47 GMT -5
|
A17 cam
by: tinman7809 - Aug 2, 2013 1:37:31 GMT -5
Post by tinman7809 on Aug 2, 2013 1:37:31 GMT -5
I have seen A-8 through A-15 but now I've seen A-17, or am I just late to the party?
anyways I'am taking it this will just be a even bigger lift cam?
|
|
|
|
A17 cam
by: jerseyboy - Aug 2, 2013 9:32:39 GMT -5
Post by jerseyboy on Aug 2, 2013 9:32:39 GMT -5
[replyingto=tinman7809]tinman7809[/replyingto]A-9 is as high as I would go,,man you will need some strong springs and keepers for that sucker!
|
|
|
|
A17 cam
by: jeepsteve92xj - Aug 2, 2013 9:46:32 GMT -5
Post by jeepsteve92xj on Aug 2, 2013 9:46:32 GMT -5
Besides being hard to find spec for all the A cams, I read someplace, possibly on a buggydepot thread, that A8-10 are high RPM performers and A12-## are low RPM torqe monsters, or vice-verse. I tried quickly to find the thread but did not have any luck
|
|
New Rider
Currently Offline
Posts: 48
Likes: 0
Joined: Jun 14, 2013 0:12:47 GMT -5
|
A17 cam
by: tinman7809 - Aug 2, 2013 14:14:42 GMT -5
Post by tinman7809 on Aug 2, 2013 14:14:42 GMT -5
I was going to purchase a A-9 and an A-15 and try both and see what works better for diffrent setups I.e Bigbore vs stock. I might try A-9 and an A-17 now. I was going to replace springs with titanium, TI retainers, and stainless valves.
|
|
