|
|
Post by SylvreKat on Oct 18, 2015 18:45:33 GMT -5
Had my brother put my scoot on the center stand, since my healing foot restricts me doing it myself. He had zero clue what he was to do at first. Even held onto the seat bag. I explained, then re-explained. I think when I actually bent over and pointed to everything, that's when it clicked for him. Press on stand, rock, lift the scooter itself, roll backwards. First real try the stand skidded. Second try, bammo!
Now I can start Peej up periodically and let everything run around inside him. And make pretend my feet are healed up and I'm driving to work.
>'Kat
|
|
New Rider
Currently Offline
Posts: 13
Likes: 4
Joined: Mar 31, 2015 9:43:29 GMT -5
|
Post by vader1701 on Oct 19, 2015 6:10:22 GMT -5
Well I had my Silverwing on the lift this past summer putting some new aux lights on.  |
|
New Rider
Currently Offline
Posts: 13
Likes: 4
Joined: Mar 31, 2015 9:43:29 GMT -5
|
Post by vader1701 on Oct 19, 2015 6:18:24 GMT -5
Here is another pic of the lights  |
|
New Rider
Currently Offline
Posts: 13
Likes: 4
Joined: Mar 31, 2015 9:43:29 GMT -5
|
Post by vader1701 on Oct 19, 2015 6:19:11 GMT -5
And the aux lights on at night  |
|
|
|
Post by SylvreKat on Oct 19, 2015 9:21:12 GMT -5
Wow vader, those are some BRIGHT lights!
>'Kat
|
|
|
|
Post by flyangler on Oct 19, 2015 9:33:23 GMT -5
Put mine up for winter and getting it ready for sale, tired of lugging around a 600lb. scooter.
|
|
New Rider
Currently Offline
Posts: 13
Likes: 4
Joined: Mar 31, 2015 9:43:29 GMT -5
|
Post by vader1701 on Oct 19, 2015 9:34:40 GMT -5
Thank you, I bought them off of Ebay and did a video of the install on my YT channel. I also give detailed directions on removing the front tupperware cowel .
|
|
|
|
Post by crawford on Oct 19, 2015 14:06:32 GMT -5
|
|
|
|
Post by SylvreKat on Oct 19, 2015 22:19:23 GMT -5
I unplugged the Battery Tender Jr and started him up...uh, after I finally remembered to hold in the brake. Total duh. And after maybe four tries of raugh-raugh-raugh. There was a bit of issue when I rev'ed him (yes, with brake on). I have no rpm-gauge thing (revometer?) so I can't tell you at what point it happened. Maybe halfway through throttling? The rev'ing actually died down, more like the idle was. Definitely a loss of power. Tried it several times, dropped to idle, then tried a few more times. Last one there was a bit of a kick even on the center stand with the brake in. Then the engine rev'ed up just fine. So analysis, anyone? My official non-mechanicky blonde  theory is there was something that got gunky from sitting a month+ that was restricting the fuel, that got pushed through from the multiple revings 'til the last one cleared it out of the way, or pushed it on through, or something technical like that.  >'Kat |
|
|
|
Post by jerseyboy on Oct 20, 2015 17:23:44 GMT -5
Wow,,totally awesome guys!!!!!
Hey Vader,can you post a link to the YT video you made,I would love to see it?
Thanks!!
|
|
New Rider
Currently Offline
Posts: 13
Likes: 4
Joined: Mar 31, 2015 9:43:29 GMT -5
|
Post by vader1701 on Oct 23, 2015 21:14:28 GMT -5
Jerseyboy there are several parts to the video's is your talking about lights.
Hope these are the right ones.
|
|
|
|
Post by ghcoe on Oct 23, 2015 23:44:18 GMT -5
This last week I installed my new trunk and grab handles. Was going to install the windshield, but it got damaged in transit. :-( Tomorrow I will install the new performance variator and sliders. :-)
|
|
|
|
Post by ricardoguitars on Oct 24, 2015 1:18:10 GMT -5
Installed xenon lights on the front and rear lights, also installed an additional led light that points to the road right in front of the front tire, it should make easier to read the road at night.
|
|
|
|
Post by ricardoguitars on Oct 24, 2015 22:00:51 GMT -5
Did some "drifter's stitching" on the plastic body panels, works a lot better than screws and doesn't brake as easily  |
|
|
|
Post by crawford on Oct 24, 2015 22:07:25 GMT -5
|
|
