|
|
|
|
Post by jerseyboy on Aug 1, 2013 20:09:28 GMT -5
Dude,, It looks like you have enough stud to get a vise grip on it very tight and back it out! Thats a good sign if my eyes are not playing tricks on me  If so,,just get another 6mm bolt long enough,,cut it to size and thread it back in the hole,,you will have to cut the head off to make it a stud. |
|
Sophomore Rider
Currently Offline
20% Cooler in 10 Seconds Flat
Posts: 162
Likes: 0
Joined: May 30, 2013 9:27:00 GMT -5
|
Post by steelace on Aug 1, 2013 20:12:14 GMT -5
You are looking at the left stud hole correct?
|
|
|
|
Post by jerseyboy on Aug 1, 2013 20:13:33 GMT -5
Yes,, There is a 1/4"nub left,,grab it tight with a vise grip and it should turn out CCW  |
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 0
Joined: Jul 27, 2013 19:40:42 GMT -5
|
Post by sickopsycho on Aug 1, 2013 20:16:16 GMT -5
yeah the pic looks like there is a protrusion there- is this the case? can you feel or see a piece of the old stud sticking out? That's what it looks like...
|
|
Sophomore Rider
Currently Offline
20% Cooler in 10 Seconds Flat
Posts: 162
Likes: 0
Joined: May 30, 2013 9:27:00 GMT -5
|
Post by steelace on Aug 1, 2013 20:17:26 GMT -5
Yes,, There is a 1/4"nub left,,grab it tight with a vise grip and it should turn out CCW Thanks! I will try that first. Should I use any wd or anything? Also, once I get it out, would you reccomend taking the other one out and replacing both? Let me go feel the stud quick. |
|
|
|
Post by jerseyboy on Aug 1, 2013 20:24:39 GMT -5
WD and a little heat wont hurt,, it should turn out,,but you need to get a real good solid grip on it.If the other stud looks good I would leave it alone.
|
|
Sophomore Rider
Currently Offline
20% Cooler in 10 Seconds Flat
Posts: 162
Likes: 0
Joined: May 30, 2013 9:27:00 GMT -5
|
Post by steelace on Aug 1, 2013 20:26:16 GMT -5
Just went out and felt it, its broke off inside, but diagonally. About 1/8 th inch in. I think I might be able to get it out though.
|
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 0
Joined: Jul 27, 2013 19:40:42 GMT -5
|
Post by sickopsycho on Aug 1, 2013 20:28:08 GMT -5
IDK if you read my previous post but YES YES YES wd-40! spray wd on it, wait 15 minutes. repeat. repeat. the more you spray and longer you wait the easier it will be to come out. also make sure you grab it with the vise grips so that the teeth can bite it. Dont grab it straight on, bite it from the side. Remove the plastic engine wrap thing if you need more room, it comes off pretty easily. If it were me I'd spray it a couple or 3 times tonight then attack it first thing in the morning (after spraying again). You might only get one or shots at grabbing that thing so dont waste them.
|
|
Sophomore Rider
Currently Offline
20% Cooler in 10 Seconds Flat
Posts: 162
Likes: 0
Joined: May 30, 2013 9:27:00 GMT -5
|
Post by steelace on Aug 2, 2013 12:54:30 GMT -5
|
|
