New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Jul 18, 2013 20:07:13 GMT -5
|
Post by dman1320 on Jul 18, 2013 20:16:06 GMT -5
Hello all, I'm new to this whole scooter thing. It took my about 2 months to convince my fiance to let me buy a scooter, and yesterday not only did she say I could, she said she would buy me one. We've been looking at the Tao Tao ATM50-A1 scooter, mostly because it is the most affordable. I've also been looking into a lot of PDI's and things to do before even starting the scooter. I realize these chinese brands are not the best, but I'm looking for something just to commute about 2 miles to work every day. What I would like to know is how these scooters hold up, and what some of you might have done with them. Also if the site's I'm looking at are reputable or not.
The sites I'm looking at are Superiorpowersports.com. Also I'm looking at gsmotorworks.com. Anything would be great from you guys and gals, and I look forward to many many years of posts on here!
|
|
|
|
Post by SylvreKat on Jul 18, 2013 21:28:38 GMT -5
Can't give you any advice on what you're asking, but I can give you a great big WELCOME!!!
>'Kat
|
|
|
|
Post by jerseyboy on Jul 18, 2013 22:35:30 GMT -5
Welcome aboard,,
Yes ,,do the basic PDI,,I did all fuel and vac lines,filter,oil,gear lube,fuse housing,tires,plug,brake fluid,belt,remove evap system,relocate take vent with filter,adjusted valves,,,tighten and go over all nuts and bolts,,lube all cable's including speedo cable,plus all the mods in my signature,,then just ride,,I dont go WOT everywhere I go,,and have 1200 KM on my Taotao with no problems so far.
Good luck and enjoy the forum!!
Tom
|
|
|
|
Post by oldchopperguy on Jul 18, 2013 23:39:21 GMT -5
 In addition, I'd recommend that you also at least test-ride a 150 cc. They're similar in size, don't cost much more, and allow you to run faster than 30 mph on streets where you need to get to 45 or 50+ to safely keep up with traffic. You will NEVER regret getting the largest-displacement version you can afford. I've been riding for more than a half-century, used to bikes that will cruise highway speeds (or a LOT faster... LOL!) and in my old age, now ride a Chinese 150. I don't miss the nuclear acceleration and warp-9 top speed... These scooters are great transportation. Actually, at 55 mph on down, it's as enjoyable to ride as a large motorcycle... Very comfortable and no clutch or gears to mess with. Just be aware that Chinese scooters USUALLY (not always, but USUALLY) will require some basic fixes and changes, often quite easy for the "mechanically challenged"... Any real issues you run into, site members here can help you out. Whatever you buy, ride safe and enjoy the ride! And, WELCOME ABOARD!Leo in Texas PS: In my sig below, that's my 75-year-old Wife doing a wheelie on our scoot when it was brand-new... Just before she ran over my foot as I tried to "retreat"... LOLOLOL!!!... She's 81 now, and pretty much leaves the riding to me, but it just goes to show you that anybody can enjoy a scooter!
|
|
|
|
Post by domindart on Jul 19, 2013 6:10:42 GMT -5
Here it is from a guy that got a better brand. Tomos is like the Kymco I believe. And I didn't do any PDI stuff... Just change the oil. Runs great with no problems now.
I would try to get a 150cc for the power. You can cruise at a good 50 mph and keep up w traffic easier than a 50.
Not saying u shouldn't do a PDI, but with a better brand you shouldn't have to retorque the bolts and go over the whole bike like u may need to on a cheapy
|
|
Freshman Rider
Currently Offline
2008 Roketa MC-74-150 /2009 Kymco People 150
Posts: 71
Likes: 0
Joined: Jul 19, 2013 11:08:46 GMT -5
|
Post by sanmar on Jul 19, 2013 14:33:40 GMT -5
Hey, newbie here to the forum too. I have a Roketa MC 74 150. Did a PDI took about a day, and have not had any real trouble with it. I have had it for 2 years now, with about 2500 KM on it. I Love it. and probably saved about a grand doing the PDI myself. Not to mention how much I learned doing it. Now I feel comfortable enough to handle anything that goes wrong on it, and hopefully frequent care and maintenance will limit the odds of that. I ordered mine from PowerRideOutlet.com on sale for 800 bucks sent to my door. Got a good deal but it was an older model (2008) that they wanted to get rid of. PRO was very good and I was able to get the bike titled and tagged no problem. I agree with the others about the 150 cc engine size. I have not regretted that decision at all. I am able to keep up with traffic going 50/55 no problem. Good luck with your purchase. I love mine! Would do it again, in a second!
P.S Glad to be with the you all!
|
|
|
|
Post by shalomrider on Jul 19, 2013 20:46:15 GMT -5
howdy and welcome to sanmar
lotsa miles and smiles to ya
ken
|
|
Sophomore Rider
Currently Offline
Posts: 196
Likes: 1
Joined: Jun 29, 2013 18:49:49 GMT -5
|
Post by newbscootdude on Jul 19, 2013 21:08:29 GMT -5
to be honest it really depends on how mechanically inclined you are. I bought a 50cc from a dealership i cant remember the price but i remember getting for around the price for those scooters in a box. I rode it for 4k miles and nothing went wrong with it until i started messing around with my carb and leaned it out too much and basically blew my engine. Now im in the midst of an 80cc bbk with no mechancial backround, taking it apart and putting it all backtogether wasnt hard althought i probs had about 20 hours worth of research before i did it. and now that its all backtogether i am having a hard time getting it to start. there are a lot of great people on this forum willing to help you with all your problems, im sure youve seen some of my post if youve browsed the forums. So if you really want to learn about scooters and enjoy working and learning about stuff like this id recommend getting a bike in a box, if not id recommend going to a dealership and buying one from them.
|
|
(need 112)