New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Mar 5, 2013 10:00:12 GMT -5
|
Post by burggyrider on Mar 7, 2013 18:39:36 GMT -5
I just bought and installed a K&N air filter for my 08 B400. This thing was a ROYAL pain to install even after watching Mitch's video on how to install it. My problem is this, the middle tab that the filter housing is supposed to fit in broke off when I applied pressure to get it in. After it bent the outer two lips fit snugly in. Will this be a major problem now and effect my scooters performance?
|
|
|
|
Post by scootnwinn on Mar 7, 2013 22:10:37 GMT -5
Do you have a picture? As long as there are no gaps visible it should be fine. The housing should hold it in place... Did you remember to oil it?
|
|
New Rider
Currently Offline
Posts: 6
Likes: 0
Joined: Mar 5, 2013 10:00:12 GMT -5
|
Post by burggyrider on Mar 7, 2013 22:22:59 GMT -5
no gaps. i believe it already came oiled. at least there was oil on my hands from it when i installed it. no pics.
|
|
|
|
Post by scootnwinn on Mar 7, 2013 22:37:36 GMT -5
Is it red yes = oiled no = go get some oil. They stock it at any auto parts store. I'm fairly certain your fine.
|
|
|
|
Post by richardthescooter1 on Mar 15, 2013 12:49:26 GMT -5
You may have re-adjust the air/fuel ratio screw, it may need to be richer  |
|
|
|
Post by alleyoop on Mar 15, 2013 13:02:56 GMT -5
Richard is correct, a lot more air is getting sucked in and you need to richen up the mixture. You are most likely running lean and mean NOT GOOD.
Alleyoop
|
|
|
|
Post by flyangler on Mar 15, 2013 14:19:45 GMT -5
I believe on the Burgy it will adjust itself .
|
|
..BAD TO THE BONE..
