Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 2, 2013 20:49:39 GMT -5
One of the brackets was off so i tried bending it...alot. Ended up with a hole on the header pipe where it was attached and its about 3 inches from the muffler. Sounds good though. Any danger having that hole in the pipe? Was thionking about patching it if its a problem.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jul 2, 2013 20:58:57 GMT -5
It won't hurt anything and you can patch it with jb weld.
|
|
|
|
Post by ramblinman on Jul 2, 2013 21:01:28 GMT -5
awww, that sucks. i would patch it. otherwise it is likely to rust faster in that spot creating a bigger hole in the future. i need to bend my pipe also. only about an inch though so hopefully i can do it without damaging anything.
|
|
|
|
Post by ridecheap on Jul 2, 2013 22:56:50 GMT -5
I hope you got a cheap FMF universal muffler like me. I really cant tell you the best sound I ever heard...
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 2, 2013 23:00:59 GMT -5
Ill post clip tomorrow
|
|
|
|
Post by oldchopperguy on Jul 3, 2013 0:11:24 GMT -5
JB Weld is good (sometimes)... LOL! Only problems I've had with it is that JB Weld IS sensitive to BOTH extreme-high heat, AND vibration... There are products available at auto-parts stores made just for such patches. One I used on my home-made system (to join aluminum tube to steel tube, as you can't weld them together) is called "INFERNO". I believe it's a ceramic clay material, made specifically to patch exhaust headers. It looks like JB Weld, but is good for 2,400-degrees. I wouldn't be surprised to find these head-pipes get to 1,000-degrees+...
Whatever patch you use (and you really don't want a hole too close to the exhaust-port) you can sand the patch down and paint it with high-temp paint to make it good as new.
After WAY more fooling with them than I EVER wanted to do, I've found the exhausts REALLY make a difference in the way these run.
Best of luck!
Leo in Texas
PS: Duh... I just remembered! For about the price of the patch material, you could almost surely have a local muffler-shop WELD up the hole! AND do the small bend you need! BINGO! LOL! Now THAT is a fix that will LAST.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 3, 2013 0:55:39 GMT -5
|
|
|
|
Post by rockynv on Jul 3, 2013 4:19:27 GMT -5
Sometimes the bandage works however it usually is not pretty. Wrapping it with metal helps but then it will probably be cheaper to just have it welded. JB Weld isn't high temp enough for the pipe on a GY6. I tried it as a sealant and it just burned off in short time so I just got out the welder and did what should have been done from the beginning.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 3, 2013 7:02:38 GMT -5
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 3, 2013 7:11:12 GMT -5
Looks better than that HUMONGOUS muffler! Attachments:
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jul 3, 2013 8:15:36 GMT -5
I can't get the video to work does it come with a removable plug to quite it down?
|
|
|
|
Post by domindart on Jul 3, 2013 14:00:36 GMT -5
Sounds good!
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 10:14:59 GMT -5
|
Post by Deleted on Jul 3, 2013 16:55:16 GMT -5
No plug
|
|
|
|
Post by domindart on Jul 3, 2013 17:00:01 GMT -5
Looks better than that HUMONGOUS muffler! Looks great. Looks better than in your sig, sig shows more matte black. I like the mix of gloss and matte you have made it.. and the decals are awesome too. ZX-6? what does the 6 stand for ? is it a 150cc ? |
|
|
|
Post by PCBGY6 on Jul 3, 2013 17:00:05 GMT -5
Where did you get this exhaust? I like the way it sounds.
|
|
Main Jet
