New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 27, 2013 14:04:41 GMT -5
|
Post by bobby17772 on Jun 17, 2013 19:44:16 GMT -5
Hey everyone I have a really weird problem. My scooter runs beautiful until I hit a bump or a pot hole. I will be riding and everything will be great then I will hit a bump and I will notice the tachometer will bottom out and then it will start missfiring and and bog way down.
Can anyone think of what this could be?
|
|
|
Post by alleyoop on Jun 17, 2013 19:55:24 GMT -5
Check your BOOT CAP ON THE PLUG and plug as well make sure it is not loose. Also check the wires connecting to your coil they could be loose. Also check the GROUND WIRE from the motor to the FRAME make sure it is not loose. Alleyoop
|
|
|
Post by geh3333 on Jun 17, 2013 22:30:57 GMT -5
One of those options are more then likely the issue make sure when checking the boot on thd spark plug make sure you check where the wire meets the coil also. If thst is the prob use some electrical tape after tightening both ends. The ends screw into the wire and somtimes will vibrate loose.
|
|
Sophomore Rider
Currently Offline
Posts: 180
Likes: 0
Joined: May 30, 2013 22:51:55 GMT -5
|
Post by ryaanlx on Jun 17, 2013 22:41:43 GMT -5
And the two small wires that clip onto the back of the coil which is bolted to your frame, this same thing happened to me and that's what it was.
Thanks, Ryan.
|
|