|
|
Post by jerseyboy on Jun 13, 2013 22:31:52 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 91
Likes: 0
Joined: Mar 2, 2013 17:24:06 GMT -5
|
Post by xxwoodmanxx on Jun 14, 2013 6:24:06 GMT -5
Honestly, for the price, you'd be much better off just replacing the airbox for an aftermarket foam filter, like a Uni. If you're wanting to maintain the stock box however, good luck. I've not found a performance drop-in for mine. I just made the leap to Uni instead. Probably saved me $20-30 anyway.
|
|
|
|
Post by jerseyboy on Jun 14, 2013 7:12:26 GMT -5
[replyingto=xxwoodmanxx]xxwoodmanxx[/replyingto]I do have a UNI but its a tight fit through the motor hanger,,might try to goto home depot and get a piece of 1" 3/4 PVC and extend it through the hanger,,also I had it on there and did not like the way the intake sounded so tinny,,for now I put the UNI inside my stock air box,,it fits in the hole perfect and the lid holds it in there just right,,the intake sounds much throatier with the air box,,I drilled some holes in it so the UNI works to its potential,,also i cant tell a difference in performance with it there or off the back of the carb,,so I guess Ill leave it alone for now.The 24mm Keihin needed to be up jetted from 102 to 115 to run right with the UNI,,good filter for sure,,its like not running a filter at all with the protection of a filter.
Thanks anyhow
Tom
|
|
Sophomore Rider
Currently Offline
The PartsForScooters Guy
Posts: 211
Likes: 15
Joined: Feb 25, 2013 14:44:11 GMT -5
|
Post by fugaziiv on Jun 14, 2013 10:51:33 GMT -5
jerseyboy - K&N does not yet make a GY6 OEM replacement filter. Sorry.
Matt
|
|
|
|
Post by jerseyboy on Jun 14, 2013 18:26:00 GMT -5
[replyingto=fugaziiv]fugaziiv[/replyingto]Thats what I figured,,
They should,,I think there would be a great market for it...
Thanks!!
|
|
