|
|
Post by geh3333 on Jun 14, 2013 18:55:01 GMT -5
If your roller weights are stock i would be surprised if they are 12 gram. They are useally a little higher but of course you never know what they are unless u weigh them yourself. I would find out for sure what they are and they buy a gram lower. It usually benifits to be able hit the sweet spot between 7000 and 7500 rpms while neiring your top speed. At this time r u able to hit above 7000 rpms on a straight stretch?
|
|
|
|
Post by jerseyboy on Jun 14, 2013 21:24:12 GMT -5
[replyingto=geh3333]geh3333[/replyingto]I will check tomorrow and report back,,I know it does about 50-53 MPH but I don't remember what the tach said.I need to go to HF and buy a cheap gram scale next week also.I do know after 45MPH the variator and clutch are fully closed and open cause the RPM keeps climbing after 45 I believe,,Ill check all that 2 morro bro,,thanks for the help!!
BTW-My beautiful stainless P&P exhaust came in the mail today,,really nice unit!! $125 free ship.Ill take a pic of it when I get R done.Gonna need to do a plug chop for it,,I already up jetted for the UNI to a 115 and it runs good.After the exhaust and variator I think I'm done modding for now,,hehe
Tommy
|
|
|
|
Post by jerseyboy on Jun 15, 2013 14:47:17 GMT -5
[replyingto=geh3333]geh3333[/replyingto]I just finished putting the P&P exhaust on it and it runs awesome! No back fire at all on decel,,pulls hard all the way up to about 55 MPH tach was about 7500,,the speedometer is within a mile an hour give or take,,i checked it up against a few radars.  |
|
|
|
Post by geh3333 on Jun 15, 2013 15:01:17 GMT -5
[replyingto=jerseyboy]jerseyboy[/replyingto]No prob. Its always exciting to get new parts in .  like to see a pic |
|
|
|
Post by scootnwinn on Jun 15, 2013 18:30:32 GMT -5
I use only American belts currently running a Carhart 32" genuine leather. I have 5 seasons on it and hope to get 2 more. Sorry guys just wanted to be a part of the discussion. Of course I have no belt just gears and an axle...
I did get a fake Gates when I had my 150 it shredded in less than 8 miles I put the Chinese one back on and ran it for 3000 more miles then I sold scoot. As far as I know its still in there
|
|
|
|
Post by jerseyboy on Jun 15, 2013 19:29:02 GMT -5
[replyingto=scootnwinn]scootnwinn[/replyingto]Its all good,,
So far I have close to 100 miles on my gates and its very smooth,,although the Chinese belt looked very durable,,i will keep it for a spare...
|
|
|
|
Post by jerseyboy on Jun 15, 2013 21:43:24 GMT -5
[replyingto=geh3333]geh3333[/replyingto]Wow the picture showed up ,,thats wierd??
|
|
