How do these two fit?  By  wutzthedeal (Read 624 times)

This shows the broken one, so I know it goes in. Please help if you got a sec. This is the difference between me riding or not, after a week and a half sidelined.

Ok that must be what it is. Here's the thing, though; I ordered the tiny sleeve/bushing that goes right over the tip of the starter clutch (same thing as bendix? or?) to hold that steady; remember because you and others thought that when I had put everything back together, that was the problem; bendix teeth grinding with variator or something. This thing, if put it on the case cover side will not fit; it will hit the variator plate. And I also don't think he will fit behind the starter clutch. I'll go check again.

Ok yes I see. Here's what I've learned; the big one in the pic posted (2nd post this thread) fits nowhere except for over the boss, It won't fit on either side of the starter clutch, and even though the tiny bushing I ordered fits on either steel shaft end of the start clutch, neither will then go into their sockets. So now, I've got two parts that I cannot place, but I know that larger one came from something inside the scooter. Can you think of anyplace else #7 can go?

Is there any chance it's part of the clutch that broke off? ANd would that make a ringing/grinding sound if missing (like the needle bushing or 34)

Gona be fine.