|
|
Post by jerseyboy on Jun 7, 2013 6:27:16 GMT -5
I would like to know what size jets i should get to play with,,I plan on installing aftermarket free flowing air cleaner,quality keihin 24mm carb(not sure what jet is in it yet),performance intake,performance exhaust,cdi,coil,and maybe sliders and gears,,but otherwise keeping it stock.
Thanks in advance guys!
regards
Tom
|
|
Freshman Rider
Currently Offline
Posts: 91
Likes: 0
Joined: Mar 2, 2013 17:24:06 GMT -5
|
Post by xxwoodmanxx on Jun 7, 2013 8:41:37 GMT -5
Iirc, stock is #107 main jet. Based on whats in my sig, i used a 120, and it was a bit too rich, so i bumped down to a 115, and seems better. Might look for a #117.5 to get it just right.. hope that helps.
|
|
|
|
Post by jerseyboy on Jun 7, 2013 8:47:18 GMT -5
[replyingto=xxwoodmanxx]xxwoodmanxx[/replyingto]Thanks for those numbers bro,,I will get a few starting with 110-117 and see how she responds!
I see most of these come with 12g rollers but you guys are using 11g sliders,,is there a reason for the 1g drop when going to sliders,,i dont want to loose any top speed,,Im striving for a little more power for a possible higher gear change that will allow me to cruise 45-50 mph no strain,,no pain,, ya know?
Tom
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jun 7, 2013 9:34:40 GMT -5
How many miles are on your scooter?
|
|
|
|
Post by jerseyboy on Jun 7, 2013 9:42:17 GMT -5
About 115 miles,,just got it together not long ago.I just ordered a chinese set of jets cloned for the keihin,,they have105,110,115,120,125,so hopefully the 110 will be sufficient for the POD,intake,and exhaust I choose.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jun 7, 2013 10:31:26 GMT -5
I would say don't mess with it the best mod you can do is put 1000 miles on it you will be surprised how much better it will perform when it is broke in.
|
|
|
|
Post by jerseyboy on Jun 7, 2013 11:36:22 GMT -5
[replyingto=jeffery5568]jeffery5568[/replyingto]Ill hold off for a little while,,already ordered most of the parts though as i like to tinker with the hobby.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jun 7, 2013 18:31:23 GMT -5
I love to tinker also more than riding. You can put your upgrades on but you will see much better results once its broke in good its hard to explain when I got my 150 it was slow I could only run about 50 at the best and it only got 55 mpg I was so dissapointed but over the first 1000 miles or so it got better and better until I could run 60+ and cruise at 50 and I could get 85mpg. Then I started messing with jets and cone air filters and free flow exhaust. It may have gave me a small bump in power the best thing I have bought is a koso varaitor I have better takeoff and much lower cruising rpms.
|
|
|
|
Post by jerseyboy on Jun 9, 2013 7:47:11 GMT -5
I have a kosco variator on my ebay watch list,,what size sliders do you recommend for me(175lbs),,I like good top speed and decent take off,,kinda like the stock gearing but might go a tad steeper after mods?
Not sure but I think it has 12g rollers in it stock?
Tom
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jun 9, 2013 7:54:06 GMT -5
I went with 10 gram you will also need a 842 belt but you may already have one on your scooter another this the koso varaitors that US sellers offer sell for around $50 I got mine from a seller in china for half that it just takes a 2 or 3 weeks to get here.
|
|
|
|
Post by jerseyboy on Jun 9, 2013 15:45:03 GMT -5
[replyingto=jeffery5568]jeffery5568[/replyingto]Ok bro,,thanks!
I just ordered a new gates power link belt 835-20-30,,guess that means Ill have to get another huh?
spend spend spend....just like any other hobby...lol
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Jun 9, 2013 20:07:11 GMT -5
Ya I would go with the 842
|
|
New Rider
Currently Offline
Posts: 34
Likes: 0
Joined: May 5, 2013 9:56:15 GMT -5
|
Post by origjoker on Jun 9, 2013 23:46:03 GMT -5
110 jet will be good for stock....112-114 after intake upgrade and 115-117 after intake and exhaust upgrade.
The 842 belt will just gets you 1-2 more mph than the 835, unless your on 50 mph+ speed limit roads a lot the 835 will do great.
|
|
|
|
Post by jerseyboy on Jun 10, 2013 20:51:05 GMT -5
[replyingto=origjoker]origjoker[/replyingto]Thanks,,
Ill run the 835 since its new,,then Ill try the 842 next.
Thanks guys!!!
|
|
|
|
Post by jerseyboy on Jun 23, 2013 21:54:52 GMT -5
Just wanted to update,,
the 115 ran a little lean on this motor,,so I found a 118 at local cycle shop,,now she is a happy camper!!
Thanks to all!!!
|
|
