|
|
Post by millsc on May 17, 2013 10:18:35 GMT -5
|
|
|
|
Post by devo344a on May 17, 2013 10:31:09 GMT -5
Is it for a 2 cycle? it looks good either way
I just put the 80cc kit In and it had head,jug,oil pump,rollers,gaskets,and im sure im forgetting somethings but it was $41.00
|
|
|
|
Post by millsc on May 17, 2013 10:34:52 GMT -5
For 4t 139qmb
|
|
New Rider
Currently Offline
Posts: 45
Likes: 2
Joined: Apr 6, 2013 19:55:33 GMT -5
|
Post by rider95 on May 17, 2013 11:29:59 GMT -5
wow that's a really nice kit and if I read right it includes a head
|
|
|
|
Post by skuttadawg on May 17, 2013 12:31:46 GMT -5
Wow that is 100+ less than anywhere else ! It does say it comes with a head too . This kit is designed to use the 40mm or 49cc head . I blew up my TaoTao twice and put this in wow so much better . I sold it over a year ago and 2 months ago I saw the guy at a gas station and its still going strong
|
|
|
|
Post by millsc on May 17, 2013 12:33:12 GMT -5
I bought it doubt it comes with a head
|
|
|
|
Post by RapidJim on May 17, 2013 14:00:31 GMT -5
[replyingto=rider95]rider95[/replyingto]Nope does not include the head
"Kit includes all gaskets, rings, piston, and circlips needed for installation.
Each kit consists of Cylinder, Piston Kit and Gaskets"
|
|
Freshman Rider
Currently Offline
Posts: 75
Likes: 0
Joined: Mar 2, 2013 9:13:10 GMT -5
|
Post by endru on May 17, 2013 18:10:34 GMT -5
|
|
|
|
Post by millsc on May 17, 2013 18:16:43 GMT -5
Ill report when i get it gonna try some hoca 16/42 gears with it time to change it up
|
|
|
|
Post by alleyoop on May 17, 2013 18:20:50 GMT -5
well it is confusing because what it contains it says many things: If you read it says this in one place and different in another. So I would call and find out what it really contains.
Alleyoop
Each kit consists of Cylinder, Cylinder Head, Piston Kit and Gaskets.
|
|
|
|
Post by millsc on May 17, 2013 18:24:43 GMT -5
I called doesn't included a head
|
|
Sophomore Rider
Currently Offline
Posts: 217
Likes: 22
Joined: Mar 3, 2013 8:42:52 GMT -5
|
Post by buford1488 on May 17, 2013 18:35:33 GMT -5
there is only one person on the east coast that doe's big valve and they are pritty dam good......lol
|
|
|
|
Post by carasdad on May 17, 2013 20:14:56 GMT -5
yes the A9 cam has higher lift...longer duration..and an advanced angle. It is one of the FEW cams they give specs for. The rest we had to measure held in a rest...using a run out gauge and degree wheel. The A9 gives best mid range to high end in Scoots we try them in. You would think the A11 and A12 would give more power than that...but the cam numbers mean nothing. The A11 and A12 are low end high torque cams..almost to the point they are for off road use like Mud Bogging..  EVEN MRP THEMSELVES...CANNOT give you specs for their cams. A buddy that works in a Machine Shop bought several grinds and had to measure them himself..at work as I described above. I think MRP sucks and is overated anyway..they are all hype...therefore big prices. The kit shown does not come with head. for a long time I tried to sell the 80 BBK's on here for that price..less one dollar..and sold not a single one. Ended up putting them in customer bikes. Same Taiwanese quality. They love them!!! But because they were so cheap...folks thought they were no good here..so as I said..I sold ZERO.. The majority think the more you pay...the better you get. That is why Stage 6...MRP...NCY and Naraku can sell stuff. By charging more peeps think they are getting more....but so not true in the world of Asian made products.  So I let them spend $300 on a pipe they can get for $100...and spend $179.00 on a 2T BBK they can get for $75. Because you simple cannot explain...more money does always buy you more.  Btw..Stage6..MRP..NCY and Naraku don't even make their parts..China and Taiwan does...stamps that companies logo on it..and BOOM!..you pay 3 times more... so  that hard earned money goodbye.. |
|
Sophomore Rider
Currently Offline
Use the force, if it breaks,it nedded to be fixed anyway!
Posts: 124
Likes: 0
Joined: May 16, 2013 22:26:39 GMT -5
|
Post by Tripper on May 18, 2013 1:05:25 GMT -5
The aluminum cylinder sold me, I was gona pay $129 on ebay before this lil tip!
|
|
Sophomore Rider
Currently Offline
Posts: 114
Likes: 0
Joined: Feb 24, 2013 10:04:01 GMT -5
|
Post by dude on May 18, 2013 8:25:15 GMT -5
When I installed one of these kits the alignment dowels would not stay in the cylinder. I bent them a little to stay stuck in the head. All four stud holes are drilled large all the way through cylinder.
|
|
..BAD TO THE BONE..
Btw..Stage6..MRP..NCY and Naraku don't even make their parts..China and Taiwan does...stamps that companies logo on it..and BOOM!..you pay 3 times more... so 
