Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 20:33:53 GMT -5
What angle for the picture? Top or from the side?
|
|
|
|
Post by millsc on May 26, 2013 20:35:22 GMT -5
side
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 20:43:30 GMT -5
How do I upload a picture? Just copy and paste into the text box?
|
|
|
|
Post by millsc on May 26, 2013 20:44:54 GMT -5
no hit alt s and choose file
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 20:46:45 GMT -5
Ok thanks, Ill have it right up
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 20:50:11 GMT -5
Here is the intake rocker arm
|
|
|
|
Post by millsc on May 26, 2013 20:50:46 GMT -5
 no pic
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 20:54:35 GMT -5
Here it is! Attachments:
|
|
|
|
Post by millsc on May 26, 2013 21:51:41 GMT -5
is it jammed on the valve?
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 22:00:24 GMT -5
Nope not jammed at all, just seems like the gap is huge and if I rotate the engine by hand it does not move the valves at all. Valves are adjusted at .0025 and .004(exhaust)
|
|
|
|
Post by millsc on May 26, 2013 22:00:38 GMT -5
take the rocker assembly off and move the arms around until its flat on the valves before you put the nuts on
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 22:55:52 GMT -5
Im not sure I understand what you mean. The rockers when not being engages by the cam lobes can "rock" freely, but when the lobes are pushing the arms they only just make contact with the top of the valve. Im thinking the rocker arms are too short.
|
|
|
|
Post by millsc on May 26, 2013 22:57:49 GMT -5
you have to move the arms when you put the assembly on so they set flat on the valve, take the four nuts off and try it again
|
|
Sophomore Rider
Currently Offline
Posts: 148
Likes: 0
Joined: Mar 16, 2013 16:19:44 GMT -5
|
Post by ej132 on May 26, 2013 23:03:47 GMT -5
They are currently moving freely, just not enough to move the valve, I mean I can use my hand and easily flick them back and forth. I just mean I'm not sure taking it off will help cause its not really jammed, just like with the valve stem is short or the rocker arm isn't deep enough
|
|
|
|
Post by millsc on May 26, 2013 23:05:23 GMT -5
you order a 64mm or 69mm big valve head?
|
|
