Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
oil
by: chamisataza - Apr 20, 2013 1:14:50 GMT -5
Post by chamisataza on Apr 20, 2013 1:14:50 GMT -5
motul 710 or 800 on my sym dd50 i have 72cc stock carb and v8
|
|
|
|
oil
by: skuttadawg - Apr 20, 2013 9:06:59 GMT -5
Post by skuttadawg on Apr 20, 2013 9:06:59 GMT -5
710 is oil injector safe and what I use . The 800 is premix only . Ifd youir premixing I would go 32 to 1
|
|
Sophomore Rider
Currently Offline
Posts: 201
Likes: 0
Joined: Mar 13, 2013 8:01:35 GMT -5
|
oil
by: burnrubber - Apr 20, 2013 14:32:14 GMT -5
Post by burnrubber on Apr 20, 2013 14:32:14 GMT -5
DX
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
oil
by: chamisataza - Apr 20, 2013 14:37:23 GMT -5
Post by chamisataza on Apr 20, 2013 14:37:23 GMT -5
thank you skuttdawg for replying now everything is clear,what i thought is 800 is much thicker oil,i just went to cycle worid here in va.and they don't have the motul 710 the guy give me the pro GN2 genuine 2 stroke injectr motor oil.is that good also for what i read it also good in break in.my break in is almost 200miles i reached 50mph once in a while.i am not doing wot yet.
|
|
|
|
oil
by: skuttadawg - Apr 20, 2013 22:42:53 GMT -5
Post by skuttadawg on Apr 20, 2013 22:42:53 GMT -5
I used Maxxima synthetic blend at first then switched to Motul 710 full synthetic . On the new build I am using Lucas synthetic blend and will go to Motul 710 when I run out of the Lucas . ALWAYS read on the bottle to see if it says injector safe or premix only . I also put a splash of oil in the gas tank to be safe
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 1
Joined: Mar 28, 2013 0:44:33 GMT -5
|
oil
by: chamisataza - Apr 21, 2013 16:29:35 GMT -5
Post by chamisataza on Apr 21, 2013 16:29:35 GMT -5
i do that too.putting some oil in the gas tank to be safe,i am just wondering when i hit 50mph it seems there still speed/power to give but it nailed me on 50mph. i have stock carb(#88mj),v8 exhaust,kelli pulley w/7g(6&8),72cc contesta.what do you think will i change ?is it the roller make it heavy.
|
|
