Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 18, 2013 15:41:59 GMT -5
Post by justinbabcock1125 on Apr 18, 2013 15:41:59 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 18, 2013 15:44:23 GMT -5
Post by justinbabcock1125 on Apr 18, 2013 15:44:23 GMT -5
How do i tell if i have a 64 or 69
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Apr 18, 2013 16:32:45 GMT -5
Take the valve cover off. If the tops of the valve stems are higher than the top edge of the head they are 69mm valves. If the tops of the valve stems are at or below than the top edge of the head they are 64mm valves.
|
|
|
|
Post by millsc on Apr 18, 2013 16:36:11 GMT -5
what brand and year do you have? Alot of the newer scoots are 69mm valves the older scoots under 2011 usually are 64mm valves
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 18, 2013 16:43:47 GMT -5
Post by justinbabcock1125 on Apr 18, 2013 16:43:47 GMT -5
Its a gy6 taotao atm-50 2012
|
|
|
|
Post by millsc on Apr 18, 2013 16:45:37 GMT -5
most likely have bought the right thing  |
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 18, 2013 16:48:43 GMT -5
Post by justinbabcock1125 on Apr 18, 2013 16:48:43 GMT -5
I have the hole motor riped down to so with out everything together i cant judge height either..so i hope so
|
|
|
|
Post by millsc on Apr 18, 2013 16:52:56 GMT -5
All the 2012 tao's ive put big bore kits on including mine had 69mm valves i would 98% say your good
|
|
|
|
Post by millsc on Apr 18, 2013 17:06:32 GMT -5
Maybe this will help one is 64mm the other is 69 the valves sit up higher on the 69mm Attachments:
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 19, 2013 0:17:08 GMT -5
Post by justinbabcock1125 on Apr 19, 2013 0:17:08 GMT -5
How can i measure it to be complely sure
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 19, 2013 22:41:43 GMT -5
Post by justinbabcock1125 on Apr 19, 2013 22:41:43 GMT -5
Ok after 80ccbbk what do i set the valve height at .004 still?
|
|
|
|
Post by millsc on Apr 20, 2013 0:18:49 GMT -5
Yes
|
|
