New Rider
Currently Offline
Posts: 15
Likes: 0
Joined: Dec 12, 2018 15:23:12 GMT -5
|
Post by ottersea on Oct 7, 2019 13:44:05 GMT -5
So finally get it running but only by spraying gas into the intake of carb. The fuel filter shows no fuel coming from the tank. I bought a new valve for the tank and it is not working. I even reinstalled the old valve and still nothing. Any idea how to get the fuel flowing?
|
|
Freshman Rider
Currently Offline
Posts: 93 
Likes: 1
Joined: May 3, 2014 8:58:49 GMT -5
|
Post by dev150cc on Oct 9, 2019 0:40:49 GMT -5
My first guess would be that the fuel valve is not getting good vacuum. IE you have a vacuum leak. I would target this first. And check all the vaccum hoses to see if they are deteriorated. You can find youtube videos for how to test a fuel petcock.
|
|
New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Nov 17, 2019 10:23:20 GMT -5
|
Post by captjeff01 on Nov 17, 2019 10:25:00 GMT -5
Had similar issue recently and it was a crack on intake manifold. No vacuum no fuel !!
|
|
|
|
Post by crawford on Nov 26, 2019 13:18:34 GMT -5
Are you sure tank gas cap vent is not plugged up ?
|
|
|
|
Post by chewbaca on Nov 27, 2019 16:55:07 GMT -5
gas cap vent is not prone to clogging on scooters and there is an overflow tube connected to the top of the tank that would do the same thing if the vent was plugged
most likely suspect in a no fuel situation is
a bad pump
a bad vacuum connection
a bad petcock
a bad filter
|
|
New Rider
Currently Offline
Posts: 9
Likes: 0
Joined: Dec 31, 2019 22:12:39 GMT -5
|
Post by lok222 on Dec 31, 2019 22:21:36 GMT -5
I'm having the same symptoms I'm going to re-check my vacuum lines tomorrow
|
|
