New Rider
Currently Offline
Posts: 37 
Likes: 1
Joined: May 20, 2016 16:26:12 GMT -5
|
Post by blazejin on Jan 12, 2018 11:28:10 GMT -5
I got this Beamer lll 2 stroke off a guy for 50$ called in the vin its not hot, it looks as if it was inside put up as there seems to be no weather damage at all. it has not ran for over a year cause the carb was messed up, so I did not clean it I just bought a new one put it on and it fired up 1st go. It will sit and idle all day but when I give it gas real hard it floods the head and blows gas out the tail pipe. I took the carb off checked the float valve and all seems to be in order with the sealing and all. Is there something that I am missing  |
|
|
|
Post by tortoise on Jan 12, 2018 12:01:51 GMT -5
If the internal petcock diaphragm is deficient . . that would allow gas to bypass the carb via the vacuum line. |
|
New Rider
Currently Offline
Posts: 37
Likes: 1
Joined: May 20, 2016 16:26:12 GMT -5
|
Post by blazejin on Jan 12, 2018 12:23:38 GMT -5
Thanks for your reply. I have Never even heard of it, I am a 4t man, but never messed with carbs, only to adjust them with air mix and jetting, other than that I have no clue on the 2t, I did replace the external petcock cause it was bad, where is it located on the carb.? and how to fix ? it is also a manual choke as well. Any help will be greatly appreciated.
|
|
|
|
Post by tortoise on Jan 12, 2018 13:29:00 GMT -5
|
|
New Rider
Currently Offline
Posts: 37
Likes: 1
Joined: May 20, 2016 16:26:12 GMT -5
|
Post by blazejin on Jan 18, 2018 0:12:26 GMT -5
I changed the petcock, it was on the gas tank, The carb. on the scooter is new, what could be the problem. with the exhaust loading up with gas? it will crank and idle all day, gas it and it slowly builds up till it sprays out exhaust. Float seems fine, seat needle in the float seems to be working. I don't get it.. Sry it took so long to get back with ya, working way too much. Thanks for the help.
|
|
New Rider
Currently Offline
Posts: 37
Likes: 1
Joined: May 20, 2016 16:26:12 GMT -5
|
Post by blazejin on Jan 20, 2018 10:27:21 GMT -5
Well I guess I will buy another petcock, and hope the new one I put on was just bought bad, and hope that's the prob, if not back to square one.
|
|
|
|
Post by pistonguy on Jan 21, 2018 14:01:56 GMT -5
Have you removed the Pipe and drained it or clear it out?
Are you injected or Pre-mix for the 2-t oil?
What kind of Two Smoke oil are you using?
|
|
