New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 28, 2013 12:18:42 GMT -5
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 28, 2013 4:16:09 GMT -5
That is how you start loving your bike, the more breaks the more you do the more you love it.. off course, once it is back in running condition.. EDIT: Lets see some pictures..
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 26, 2013 11:18:53 GMT -5
I am very new to scooters, 3 days old new.. But I had motorcycles in the past, and the headlights sometime do not work if the scooter's engine is not running. so check that out..
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 26, 2013 5:52:16 GMT -5
Ok.. Yeah may very well be the clutch.. I tried to take the variator off today to then remove the clutch to inspect it and put some wd-40 on the springs... BUT I couldn't get the nut loose, I will try a different method another time.. fine sandpaper, 600 grit?
The scooter has about 1500kms, tho the teller says 1200 because the cable had broken not long ago.
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 25, 2013 11:47:35 GMT -5
Here are some pics of the scoot. Guys, could you tell me what could be the reason for the clutch not engaging until about 5000rpm?
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 25, 2013 2:38:08 GMT -5
Hello everyone!
two days ago me and my lady friend recently bought a used Baotian Rocky (I will post pictures later today)
I have done the following so far.
Oil change Gear oil change New fuel lines and vacuum lines New fuel filter New speedo cable (the old one was broken) New battery New valve stems front and back.
Today I will bleed the front brake and try to clean the carburator...
I think the starter relay is shot because when I press the botton for electric start nothing happens, and I tested the starter by running 12v straight to it and it worked.
Any additional suggestions are welcome!!
Pedro!
|
|