New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Apr 21, 2014 19:18:53 GMT -5
You didn't indicate the mileage of the vino. I would torque the front axle to 70 Nm and the rear wheel nut to 105 Nm. those are the Yamaha specs from the service manual. Then take it for a ride. If you do not have a Service Manual, get it here: www.itistheride.com/Yamaha_YJ125_Service_Manual.pdf. |
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jan 2, 2014 19:55:41 GMT -5
I routinely ride in the winter to and from work. The coldest temperature was 15 deg. My only limiting requirements are that the roads are 'clear and dry' and my scooter starts.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jul 7, 2013 8:56:56 GMT -5
Thanks Guys, the engine loading possibility is interesting. It does accelerate quietly when accelerating downhill. Cruise rpms are way lower than my ch80. A set of sliders is on my list of upgrades.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jul 3, 2013 6:47:07 GMT -5
Thanks. I will investigate over the holiday weekend. I appreciate your help greatly.
Have a happy and safe 4th!
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jul 1, 2013 18:35:29 GMT -5
[replyingto=geh3333]geh3333[/replyingto]Thanks geh3333, I checked the exhaust, brackets and header bolts. No luck. Its quiet on the stand but rattles while riding lt. It probably happens due to the suspension being compressed. I'll find it eventually.
Thanks again.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jun 30, 2013 12:23:29 GMT -5
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jun 30, 2013 12:17:28 GMT -5
Video? Sound? Way too high tech for me! That's why I bought the Vino. Basic, old technology - like me.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: May 4, 2013 8:54:42 GMT -5
|
Post by mater on Jun 30, 2013 12:01:33 GMT -5
Howdy, Does anyone know what causes the Vino to rattle on acceleration? Let off the gas and it quiets down. Already checked the timing and fuel. Thought I would check with the experts before I started removing likely culprits. Its a 2008 with 1150 miles.
|
|
