New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 1, 2013 4:16:04 GMT -5
|
Post by ms21117 on Apr 4, 2013 9:51:14 GMT -5
I have a 60cc Tao Tao I am trying to rebuild..I saw somewhere on here that I could spray starter fluid (or gas) to prime the carb "through the top of the carb"...... I've been spraying it thru the air intake,,,in front of the air filter....is there a better/ easier place to spray it>  Thanks!!!!! Great forum! |
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 1, 2013 4:16:04 GMT -5
|
Carb adj
by: ms21117 - Apr 1, 2013 5:32:38 GMT -5
Post by ms21117 on Apr 1, 2013 5:32:38 GMT -5
Thanks...should both valves on this engine be at .05 mm?
|
|
New Rider
Currently Offline
Posts: 3
Likes: 0
Joined: Apr 1, 2013 4:16:04 GMT -5
|
Carb adj
by: ms21117 - Apr 1, 2013 4:23:24 GMT -5
Post by ms21117 on Apr 1, 2013 4:23:24 GMT -5
I have a 1p39qmb tao tao...having problems keeping it started..it's a 2011 w/ 4,000 miles on it (I just got it to fix up)..I put a new card on and.I think I screwed up the low speed air/fuel mixture screw setting....if I wanted to start from scratch...lets say with the screw all the way in...where would I go from there?
Also...it the same carb used for a 50 cc and 60 cc? Mine is a 60 cc..
Thanks!!
|
|
