|
|
BBK brands
by: uncleozzy - Apr 12, 2018 14:29:41 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 14:29:41 GMT -5
I just got my other variator and it says YunShuo brand. The plate on the back says koso! Is this one of those fakes. The rollers were all 7g right on the money. The rollers say x- power. It came with 4 sets of rollers 5678g rollers. I paid $40 for it. What do you thik?
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 11:54:13 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 11:54:13 GMT -5
Thanks to all you guys you've given me great advice and imput for my scoot. I couldn't have done it without you guy's God Bless you all thanks so much I truly do appreciate everything you all have done!
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 11:51:43 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 11:51:43 GMT -5
After this she's going for a nice ride and then a little beat run to see how fast my scoot is now!!!! Yeeehaw! Ride em ozzy!
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 9:12:36 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 9:12:36 GMT -5
So when do I graduate to sophmore? And don't forget the star for my forehead this time lol!!!!....
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 9:10:15 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 9:10:15 GMT -5
Thankyou I just happened to have those Dr pully rollers in my cart from last night. I finally did something right on my own last night!! Woopde doooo!! Ths freshman is learning.
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 8:52:07 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 8:52:07 GMT -5
My question was who makes the best rollers I don't care how much they cost!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 8:50:09 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 8:50:09 GMT -5
All the reviews I read about crappy dogs are really bad. I wouldn't buy a flange nut from them. I guess the name says it all dogs!! Scrappy sounds like the bottom of the garbage barrel and dogs is self explanatory haha. I almost purchased from them till I saw the reviews and their ridiculous prices. Anybody know where I can get a high torque starter for my little harley 50cc 1p39qmb?
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 8:43:03 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 8:43:03 GMT -5
What brand of rollers should I buy I already have a koso variator in my cart from last night at parts for scooters. I have Dr pully rollers in my cart but I want the best rollers for my money Dr pully is too expensive. I don't like them already lol!! So what's the skinny on this!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 11, 2018 17:46:46 GMT -5
via mobile
Post by uncleozzy on Apr 11, 2018 17:46:46 GMT -5
How are the Polini and Koso variators?
|
|
|
|
BBK brands
by: uncleozzy - Apr 11, 2018 17:24:59 GMT -5
via mobile
Post by uncleozzy on Apr 11, 2018 17:24:59 GMT -5
Thanks for the advice. I'll use the rollers that came with my variator set. I bought a cheap one till the end of the month when my other kit comes in.nice pics you have me convinced! Dr. Pully is kind of expensive for my budget right now but in the near future I will get a Dr. Pully variator. I'm juse experimenting right now to see what weight is best. I bought nuts and washers for my new cylinder studs and they all stripped out!! Thank God it was just the nuts when I torqued them. That was the gy6 store! Nice stuff!! I totally freaked out thinking it was my block that stripped out, but new nuts at the hardware store down the street and I'm good to go. Just waiting for a few tools and parts and the scoot will be flying!!! I have 2 carbs set up for a quick change if it needs more gas. Can't wait to test it out.
|
|
|
|
BBK brands
by: uncleozzy - Apr 11, 2018 9:30:02 GMT -5
via mobile
Post by uncleozzy on Apr 11, 2018 9:30:02 GMT -5
Can I put slider weights in my variator. Or is there a different type of variator to use sliders?
|
|
|
|
BBK brands
by: uncleozzy - Apr 8, 2018 15:49:00 GMT -5
via mobile
Post by uncleozzy on Apr 8, 2018 15:49:00 GMT -5
Finally cut the nut off didn't do too much damage just have to chase the threads. Now that I got all my variator parts I can't collapse the clutch spring to get my belt on. Holy crap it's just one thing after another. FYI the metric nut is 12mm x 1.25 and that will fit incase somebody needs one. Bustted the fan up getting the nut off the variator. That thing must have been torqued to 100lbs. Now I have to wait till thurs when I get some cash to get the 12mm x 1.25 die to chase the threads and order a fan nice!! The good thing is I learnt more and it's all fixable!! Cool beans!! Problem solved!
|
|
|
|
BBK brands
by: uncleozzy - Apr 8, 2018 7:49:31 GMT -5
via mobile
Post by uncleozzy on Apr 8, 2018 7:49:31 GMT -5
Yeah I got it!! If I could get the nut off the variator. This thing seems like its welded on I cut the crap out of it with a nut breaker and it still won't budge. I shudder to see the threads on the crank under this nut. What a nightmare this nut is. I can't believe this thing is on as tight as it is. Inconceivable!!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 6, 2018 17:08:30 GMT -5
via mobile
Post by uncleozzy on Apr 6, 2018 17:08:30 GMT -5
I am cutting the nut off I tried everything. Thats the last resort I was hoping I didn't have to do, but oh well happens!! Thats exactly what I'm doing is learning with the cheap stuff before I get Naraku parts for it! Good call on both replies. My dining room is a mess the scooter is almost completely apart. I'm waiting for my brother in law to go to the shop and press my new final gear in open the holes on the clutch a bit bigger for more air flow. Last but not least finding a socket big enough to take the 38mm nut off the clutch. Just waiting on parts too. Can't wait to play some more I'm having a blast doing this stuff. Seems like a good way to make some cash on the side too!!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 5, 2018 20:00:12 GMT -5
via mobile
Post by uncleozzy on Apr 5, 2018 20:00:12 GMT -5
This turned into a nightmare from !! I finally got my final gear off. The videos I watched must have been a 150cc mine is behind the brakes, but I did it ma! lol i cant get my variator nut off this must be on there at 100ftlbs it won't budge. My last resort is some heat on it. This I really don't want to do, but I don't think there are any other options! You have any thoughts on this it's a right hand thread correct? I hope I'm not trying to tighten a left hand thread? Any imput would be helpful.....
|
|
