|
|
BBK brands
by: uncleozzy - Apr 21, 2018 9:56:37 GMT -5
via mobile
Post by uncleozzy on Apr 21, 2018 9:56:37 GMT -5
I know what you mean! My brother in law keeps telling me I could have bought a new scoot, but I will master this one. This is my little harley, and I'm wondering if I can put bigger wheels like 12"? I'm paranoid about these 10" wheels. He's always sinking hundreds at a time on his Harley! I think he's worried that my scoot is gonna be faster than his Harley D lol.
|
|
|
|
BBK brands
by: uncleozzy - Apr 20, 2018 11:24:44 GMT -5
via mobile
Post by uncleozzy on Apr 20, 2018 11:24:44 GMT -5
Yes I set them at .004 I think its the wireing on my cdi when I move them around enough it fires up. I'm replacing the cdi and the connections. I have to take it apart again anyway to put the new big valve head and gasket in and I always check my valve gap before the valve cover goes back on. I had it running last night but the connections aren't good. So after that I think the problem should be solved.
|
|
|
|
BBK brands
by: uncleozzy - Apr 19, 2018 2:31:11 GMT -5
via mobile
Post by uncleozzy on Apr 19, 2018 2:31:11 GMT -5
I think you were right about the air leak there was no exhaust gasket in the head. It's all back together but I can't run it till I get a starter. There is no reason it shouldn't start now I'm praying. Thankyou for the good call on that. Time will tell when I get my starter. I just hope I don't miss any good riding days. I'm up for a nice long relaxing ride. God Bless!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 18, 2018 11:04:21 GMT -5
via mobile
Post by uncleozzy on Apr 18, 2018 11:04:21 GMT -5
It's back to square 1 my starter crapped out too. I guess I'll have to start over and re assemble the whole motor. I've done it so much I can strip it down and re do it in about 2hrs lol you gutta love it!!! My scoot is lucky I love it or it would have been all over the yard in pieces and those ain't Reeses pieces!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 17, 2018 17:32:09 GMT -5
via mobile
Post by uncleozzy on Apr 17, 2018 17:32:09 GMT -5
My brother in law put the cam in 180 degrees off and when it backfired flames came out of the exhaust and the exhaust valve bent.
|
|
|
|
BBK brands
by: uncleozzy - Apr 17, 2018 17:27:13 GMT -5
via mobile
Post by uncleozzy on Apr 17, 2018 17:27:13 GMT -5
I have a  jet a 34 slow jet. The exhaust has the small gasket in it. I have spark fuel the timing is right on the money and the valve gap is .oo4 what it is supposed to be. I even used either and it wont start. W.T.F. is up with this. The exhaust valve bent in my big valve head. I set it up the way I got it when the dealer did it. I put the stock head the stock cam back in and nothing!!! I'm stumped with this. |
|
|
|
Post by uncleozzy on Apr 15, 2018 12:59:35 GMT -5
I'm buying from parts for scooters from now on. They have awesome service and shipping. Fantastic place to do business with!!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 15, 2018 12:57:10 GMT -5
via mobile
Post by uncleozzy on Apr 15, 2018 12:57:10 GMT -5
What a FN idiot that guy was. I bet it was the gy6 store right? I can't get my scoot since that stud broke. The timing is on and I get a backfire and no ignition. Do you know what could be wrong I took this apart and timed it with the proper tourque about 5 times and still won't start!!!  ? |
|
|
|
BBK brands
by: uncleozzy - Apr 13, 2018 16:35:12 GMT -5
via mobile
Post by uncleozzy on Apr 13, 2018 16:35:12 GMT -5
What if that Mopedfactory is buying these parts without the stamp so they have something good to sell at a reasonable price!! It's not unheard of for a company to sell their seconds or their product without the original stamp as a unbranded product!! Think about it before you act, but let me know what happens I'm really curious about this issue. Keep me posted. God Bless!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 13, 2018 12:04:30 GMT -5
via mobile
Post by uncleozzy on Apr 13, 2018 12:04:30 GMT -5
I'll take em!! And one of my carbs has a air mixture screw the other dosent they are both stock carbs. I put a # main jet in one with a #34 idle jet and the other has a # 30 idle jet and a #  main for a quick change if need be. However I will look into those rollers you mentioned when I get my variator squared away and I have 2 to beat up before I get my real Koso and the good rollers. Coool beans everything just seems to come out in the wash and I like it. I just hope the bolt I lost didn't fall in the crankshaft casing oops! Just kidding! |
|
|
|
BBK brands
by: uncleozzy - Apr 13, 2018 11:13:58 GMT -5
via mobile
Post by uncleozzy on Apr 13, 2018 11:13:58 GMT -5
Gy6 store is on my s#%t list they are rude very the wouldn't even check on when my order went out for shipping. We get 100's of orders a day Well no s#%t it a business. Can't take time for something I'm waiting for I guess I won't have time to order from them at all any more. Its parts for scooters from now on. All the packages from the variator say koso on them. Springs, weights but a rip off variator. I'm buying a whole bunch of stuff from parts for scoots and took everything out of the gy6 store and ebay. They are great to deal with so I'll deal with them exclusively. No Hai Marys or Our Fathers I just talk to Him like a Father!!
|
|
|
|
BBK brands
by: uncleozzy - Apr 13, 2018 8:56:46 GMT -5
via mobile
Post by uncleozzy on Apr 13, 2018 8:56:46 GMT -5
Mopedfactory Shanghai china. I'll get the real deal soon. I have 2 cheapos to use now.
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 21:55:13 GMT -5
Post by uncleozzy on Apr 12, 2018 21:55:13 GMT -5
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 21:46:57 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 21:46:57 GMT -5
I need you to tell me how to upload pics
|
|
|
|
BBK brands
by: uncleozzy - Apr 12, 2018 14:31:56 GMT -5
via mobile
Post by uncleozzy on Apr 12, 2018 14:31:56 GMT -5
I just saw an the package of the rollers and they are Koso!! Maybe I got a real one?
|
|
jet a 34 slow jet. The exhaust has the small gasket in it. I have spark fuel the timing is right on the money and the valve gap is .oo4 what it is supposed to be. I even used either and it wont start. W.T.F. is up with this. The exhaust valve bent in my big valve head. I set it up the way I got it when the dealer did it. I put the stock head the stock cam back in and nothing!!! I'm stumped with this.
main for a quick change if need be. However I will look into those rollers you mentioned when I get my variator squared away and I have 2 to beat up before I get my real Koso and the good rollers. Coool beans everything just seems to come out in the wash and I like it. I just hope the bolt I lost didn't fall in the crankshaft casing oops! Just kidding!
