|
Post by millsc on Aug 24, 2013 23:43:58 GMT -5
it did work this way not sure what to tell you
|
|
|
Post by millsc on Aug 24, 2013 22:44:52 GMT -5
and it would not start with cdi kill wire unpluged it starts when its plugged in
|
|
|
Post by millsc on Aug 24, 2013 22:41:58 GMT -5
i did pull the cdi kill wire it didn't start, i pulled the ignition as last result
|
|
|
Post by millsc on Aug 24, 2013 22:24:34 GMT -5
told them to get a new ignition
|
|
|
Post by millsc on Aug 24, 2013 21:06:00 GMT -5
I changed the stator still no start, unplugged the ignition and jumped the solenoid it fired right up
|
|
|
Post by millsc on Aug 24, 2013 15:39:18 GMT -5
[replyingto=alleyoop]alleyoop[/replyingto]will do i'll report back
|
|
|
Post by millsc on Aug 24, 2013 15:32:31 GMT -5
what should i do first?
|
|
|
Post by millsc on Aug 24, 2013 15:25:27 GMT -5
ok ill check the stator i have a flywheel puller
|
|
|
Post by millsc on Aug 24, 2013 14:43:57 GMT -5
I have a repair i'm doing on a jinlun 50cc can't get any spark from the plug, i changed the coil cdi spark plug and redid all the grounds and check the plugs and wires no spark whatsoever from the plug. I'm thinking stator pick up must be the issue what do you guys think?
|
|
|
Post by millsc on Aug 24, 2013 14:39:12 GMT -5
man thats rough always wear the helmet with a face shield
|
|
|
Post by millsc on Aug 24, 2013 7:28:02 GMT -5
300 bucks to make a tao run is alot you'd be better off to buy a new one online you can get them cheap for 650 bucks and transfer your big bore kit over
|
|
|
Post by millsc on Aug 22, 2013 22:57:21 GMT -5
i can buy a new crank for under 50 bucks but don't wanna put money in it been too busy with other scoot jobs no time
|
|
|
Post by millsc on Aug 22, 2013 22:49:05 GMT -5
it has less than 2000 miles it was a mess inside
|
|
|
Post by millsc on Aug 22, 2013 22:48:23 GMT -5
good post maybe i should locktite my engine mount bolt since i removed it to take the engine out
|
|
|
Post by millsc on Aug 22, 2013 22:38:39 GMT -5
i went to rebuild my 150cc scoot i got for 35 bucks, the piston was melted and the dowel was stuck to the crank rod could not get it off so couldn't rebuild it. Gonna sell for 75 bucks, not gonna put money in it
|
|