|
Post by millsc on Jun 22, 2015 13:02:17 GMT -5
I'm running normal 10 inch wheels I hit 57 gps this morning on the expressway going to work. I'll video this weekend I'll start further back on the expressway it's a 50mph zone and I'm pretty sure I can get 60. I'll Velcro my phone to the dash using my gps speed app I hit 57 In a little over a quarter mile I'm sure with a longer run I'll achieve my goal.
|
|
|
Post by millsc on Jun 19, 2015 20:45:48 GMT -5
I did more gps runs on the way to work I believe I can do 60gps gonna do the video next week will post after.
|
|
|
hoca 52mm kit
by: millsc - Jun 14, 2015 21:43:06 GMT -5
via mobile
Post by millsc on Jun 14, 2015 21:43:06 GMT -5
The hoca head is already ported to match the 150cc manifold.
|
|
|
Post by millsc on Jun 12, 2015 22:53:43 GMT -5
It was slower with the koso I haven't tested the Dr pulley it may do great but it runs so good at the moment I'll probably leave it. I did have to run a 200 cca battery to use the e start I routed the wires under the seat.
|
|
|
Post by millsc on Jun 12, 2015 22:33:55 GMT -5
I've been testing it doing gps runs it did 51 gps with the 20mm I put on a 24mm carb got it tuned in and it now runs 56gps gonna vid after break in it May reach 60 without the stroker. Its not much slower than my 150 on flats but the 150 is way stronger on hills.The hoca 52mm with matching head one gasket is the way to go I'm running the 17/49 gear set and its actually faster after I took off the koso and run stock variatior and 5 gram sliders.
|
|
|
Post by millsc on May 25, 2015 20:27:51 GMT -5
I'm running a 20mm I tried the 24mm actually had better results this go around with 20mm. I've ran 24mm carbs in the past.
|
|
|
Post by millsc on May 25, 2015 19:30:54 GMT -5
Im shooting for 60gps
|
|
|
Post by millsc on May 24, 2015 20:55:01 GMT -5
I'm running a hoca 52mm kit with a hoca big valve head and uni i run a in my 20mm carb I go by the way it sounds and runs. I can tell by the sounds and how it behaves if its lean or rich I don't check plugs anymore. Your plug check won't be accurate if you don't run wide open anyways you can just ride and not be wide open and have a lean plug if it's lean at idle or midrange.
|
|
|
Post by millsc on May 24, 2015 11:27:25 GMT -5
I've got the 17 49 gear set performance pipe and everything else maxed just need the stroker may do it in a week or so
|
|
|
Post by millsc on May 23, 2015 20:40:35 GMT -5
I got my hoca 52mm bbk installed today with the matching 52mm hoca head it went in no issue no boring the case one gasket. It so far is the best bbk I've installed it wheelies so no need to fear it won't fit it fits fine at least on Tao Taos.
|
|
|
Post by millsc on Apr 10, 2015 21:57:50 GMT -5
Gonna save up and buy all the parts at once, I know the saying one part at time but I'll be fine lol.
|
|
|
Post by millsc on Apr 10, 2015 8:55:09 GMT -5
I'll probably get the Dr pulley variatior never tried it always been curious. I still have my 150 btw.
|
|
|
Post by millsc on Apr 9, 2015 21:55:01 GMT -5
On the atm it's doubtful that I can up the tire size I got it because its lightweight.
|
|
|
Post by millsc on Apr 8, 2015 10:26:44 GMT -5
Scooter is in my garage its about to begin
|
|
|
Post by millsc on Apr 8, 2015 9:03:50 GMT -5
Scooter will be here today pretty fast shipping got it from provenpowersports.com
|
|