|
|
Post by devo344a on May 12, 2013 21:51:45 GMT -5
Scootnwinn--I will have a bunch of bigbore stuff soon I will be able to give away
Where is Tierra Azul ? IM in Deming nm
|
|
|
|
Post by devo344a on May 11, 2013 9:02:48 GMT -5
Usually they have a silver and black silver one first black second.If it was me Silver lip one on top
|
|
|
|
Post by devo344a on May 10, 2013 22:55:59 GMT -5
mine from this one was $1,65 not to much
|
|
|
|
Post by devo344a on May 10, 2013 22:32:11 GMT -5
Go get a piece of dimond plate and make one use your rubber one for a pattern thats what im going to do
|
|
|
|
Post by devo344a on May 10, 2013 22:29:13 GMT -5
I havnt had a real bad time with shiping usually from 3to5 days Im a little closer to california but like you said if you have the time to wait its worth it.
I just ordered the GY6 blue racing CDI for $9.99 and I always look at scrappydogs prices and theres was $24.00 exact same thing.
Ive heard of drop shipping dont really know what it is just guessing they get alot of orders and bring them here to the US and split them up and ship them from there I believe thats what they do dont think they have a warehouse
|
|
|
|
Post by devo344a on May 10, 2013 22:19:28 GMT -5
Look at this parts place chinesepartswholesale.com at the top of the page everyday they have specials there are 3 everyday.
they have mufflers quite often and real cheap only draw back is sometimes they are slow shipping like 5to8 days most of the time there shipping prices are cheap hope this helps you if not PM me and I will tell you a way to use what you have
|
|
|
|
Post by devo344a on May 10, 2013 18:50:47 GMT -5
I wouldnt just use a pipe.
What I did was grinded the end cap off of the muffler cut the muffler off at about 8 in from the front. the pipe that comes in is capped and I drilled 3 3/16 holes in the cap
when you cut it off at the 8in it gets rid of the baffles. but grind the end you cut off clean and grind the cap tap it back onto the muffler end and you can have it welded mine went on enough to screw it on but I soldered mine on in a few spots and it works great gives it a nice sound but not to loud
|
|
|
|
Post by devo344a on May 10, 2013 18:41:44 GMT -5
Millsc just went and checked the shipping is $6.99 on the carb
|
|
|
|
Post by devo344a on May 10, 2013 18:38:40 GMT -5
Millsc the shipping isnt free but its usually cheap I just bought a BBk and theres has jug,head,oil pump,and a few other things for $41.00 and I think the shipping was approx $7.00 which isnt to bad.
|
|
|
|
Post by devo344a on May 10, 2013 13:23:24 GMT -5
Hank and everyone sorry for the last post
|
|
|
|
Post by devo344a on May 10, 2013 13:07:06 GMT -5
The only reason i put it on here is its cheap thought someone might need one and dont have alot of money I have all the stuff I need.
Just trying to help out my fellow forumers I guess I just wont waste my time anymore
|
|
|
|
Post by devo344a on May 10, 2013 10:02:17 GMT -5
I already have a 20mm on mine but going to buy one for a spare and to play with.
There are 2 carbs on the sale one reg one high perf.
|
|
|
|
Post by devo344a on May 10, 2013 9:03:37 GMT -5
Thats what i figgure its not the fastest place to order from but pretty good deals. I order things i dont need fast and havnt had a problem yet
|
|
|
|
Post by devo344a on May 10, 2013 8:39:45 GMT -5
Just saw a 50cc gy6 carb on special at chinesepartswholesale.com
it says it a performance carb for $19.99 cant go wrong im going to order one just to mess with
|
|
|
|
Post by devo344a on May 9, 2013 23:06:59 GMT -5
Just make sure your cam lays down in the groves if the opposite end of the cam not the gear side if it sticks up after putting chain on the cam something is wrong my problem after breaking 3 chains was the gasket they sent me it was a thick one like one on a car after i found the tin gasket everything went together properly. So far no one else has had this problem. MILLSC said it could have been from it being a peace brand
|
|
