Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 23, 2013 19:22:48 GMT -5
Mine does the same thing I balanced the tire and its  % better. |
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 22, 2013 19:41:17 GMT -5
Mine has 14 gram rollers and it "shifts" at 5500 rpms but after that it will keep climbing until I let off I have ran it up to 9500 rpm. I ordered a 115 koso varaitor with 12 gram rollers. Hoping I can take off faster when it shifts I feel it lose power.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 20, 2013 20:08:45 GMT -5
I can squeeze 60mph on flat ground but I have to tuck and it takes a long stretch. I have hit 67 down hill engine was turning 9k
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 20, 2013 13:26:22 GMT -5
Good luck.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 17, 2013 19:40:52 GMT -5
Wet sand the scratch with 1500 grit until its smooth then buff it with compound.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
pair system
by: jeffery5568 - Apr 17, 2013 17:16:05 GMT -5
Post by jeffery5568 on Apr 17, 2013 17:16:05 GMT -5
If you don't want to make a block off plate you could get some jb weld and fill the hole in the head. It just keeps exhaust from coming out.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
pair system
by: jeffery5568 - Apr 17, 2013 16:57:32 GMT -5
Post by jeffery5568 on Apr 17, 2013 16:57:32 GMT -5
Rip it all out and make a block off plate out of a thin piece of metal using a dermal or something like that. Then you can throw everything away and plug the vacuum line off of the intake elbow. But it does not make any change in power you gain nothing from taking it off other than losing a few pounds of crap.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 16, 2013 19:24:17 GMT -5
I want a offset key I am not on a budget just super cheap.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 16, 2013 16:42:24 GMT -5
How much did you move it?
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 16, 2013 15:04:10 GMT -5
Get some of the engine kits that go on bicycles then you would have the best of both worlds.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 16, 2013 14:24:48 GMT -5
Has anybody had any luck advancing timing by drilling out the pickup coil and moving it?
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 15, 2013 21:34:49 GMT -5
Its pollen.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 15, 2013 21:25:14 GMT -5
I want to cut mine off.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 14, 2013 21:38:43 GMT -5
I have a 110 jet in it now I am going to put a 112 and see how that does.
|
|
Sophomore Rider
Currently Offline
Posts: 239
Likes: 1
Joined: Mar 13, 2013 9:13:17 GMT -5
|
Post by jeffery5568 on Apr 14, 2013 21:18:43 GMT -5
I got mine off eBay scooter feels like its got a tad more power but its loud kinda gets on my nerves.
|
|
% better.
