New Rider
Currently Offline
Posts: 38 
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 23, 2014 16:57:06 GMT -5
awesome. thank you both. do i still need a ring or no?'
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 23, 2014 16:07:29 GMT -5
it's the gasket. i pulled it out and it was lopsided. i must have put it in the wrong way :/ also could i use a gasket plate vs a ring? |
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 23, 2014 15:49:07 GMT -5
it's the gasket. i pulled it out and it was lopsided. i must have put it in the wrong way :/
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 22, 2014 18:17:43 GMT -5
i will open in up tomarrow and try that out. but update. up on it's forks i was showing someone the popping and it full on back fire. sounds like a 9mm.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 22, 2014 16:09:50 GMT -5
ok. so it IS popping when i let off the throttle completly at 30-45mph. no spped up or slow down. just a few pops.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 21, 2014 20:15:48 GMT -5
yup yup. awesome. i only road it up the road and back though. tomorrow i'll break it in. i was low on oil.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 21, 2014 19:51:58 GMT -5
well it's not random popping or sputtering sounds like i said it's just pupupupupupupupupupupupupupu. it's consent when not accl. i don't know if that is still "a popping sound." actually i found this. this is my model scooter and the same pipe and you can hear the pupupupupu i mean.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 21, 2014 19:16:56 GMT -5
after 2 weeks of welders refusing to warp the pipe i got fed up and bent it by hand. i know it was risky but it WORK! and 6 hours later and my new muffler is on. one concern aside from the fact it's loud as shat. is that it kind of putts when slowing down. it's not a back fire. it's just like pupupupupupupupupup. i'm not used to after market mufflers. is it normal? it's running great. not loss of power or sputtering.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 16, 2014 14:43:56 GMT -5
now. my 150 with a fat tire and stretch would look REALLY cool. BUT!, i like taking tight fast turns. so i think the fat back isn't a good idea. also it would add more weight.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 16, 2014 8:40:09 GMT -5
pcbgy6 has got it, and thanks. i didn't think it did. i do like the ook but i'd rather extend the floor board for more leg room lol.
and no allyoop. it rotates the 150cc motor back and put a shock between the top moutning point and the side mounting bracket.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 15, 2014 22:45:33 GMT -5
opps. it didn't quote  . he was asking about the cold weather and start up. |
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 15, 2014 22:22:41 GMT -5
not long at all. at 32f it took maybe 3-4 min. you can here the motor start to pick up. thats what i always go bye. also you can check bye revving. if the RPM are low you know it's not ready.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 15, 2014 22:15:51 GMT -5
yeah but the carb is right on top and even has any access panel in the bucket. no reason for all the.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 15, 2014 22:13:03 GMT -5
it's a shock the extends the motor and back wheel out and stretches the scoot.
|
|
New Rider
Currently Offline
Posts: 38
Likes: 0
Joined: Mar 13, 2014 21:50:01 GMT -5
|
Post by vikcreed on Mar 15, 2014 21:24:00 GMT -5
you have to take the bucket out. no side panel. i have the same scoot. it's the one in my pic.
|
|
