New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Mar 27, 2016 10:47:38 GMT -5
i have a 2007 tank touring 150...one of my low beam bulbs is shot ..does anybody know the bulb number like from napa etc..or do i need to order one...also can you do the hid light kits to these ?thanks
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Aug 5, 2013 16:58:40 GMT -5
i have both set at .004 and the .005 wont slide in ...it trys to start but will only idle a few seconds and die
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Aug 4, 2013 11:29:20 GMT -5
i,ve got it down to the valves...set at tdc...holes lined up right...do i turn the adjustment till it wont turn anymore with the guage in between compressing the spring or just lightly tighten?
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Aug 1, 2013 20:18:02 GMT -5
cool thanks i was wrong its still trying to run but only if you using throttle i,ll check out the valves this weekend
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Aug 1, 2013 12:18:34 GMT -5
it was running better than it ever has just till a few days ...but now it acts like it wants to run but dies soon as it starts....how do you adjust the valves or check them?
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Aug 1, 2013 4:56:01 GMT -5
it was running but now it only starts for a few seconds then dies.....where arethe adjustments on the carb
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jul 31, 2013 19:25:24 GMT -5
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 24, 2013 20:46:29 GMT -5
if you have a cheap stereo antenna on your scooter and it breaks and if you have any cb antenna around just take a cb antenna and solder a radio plug on the end of your coax ..works just as good as a regular antenna and you can use a mirror mount to mount it to the back rack
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 24, 2013 19:47:22 GMT -5
i got my brakes halfway working gonna try to bleed them some more ...took a test ride and saw i had a gas leak from the fuel sensor i got from scrappy dog that didnt fit just right and wont work i,m just gonna put the old one back on
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 24, 2013 16:02:58 GMT -5
i may be getting somewhere now..got the mighty vac pulling fluid though the line ..will keep at it...thanks for the tip about the mighty vac i can use it for my motorcycle and trucks too
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 24, 2013 14:45:00 GMT -5
i bought a mighty vac bleeder today will give that a try..
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 23, 2013 18:38:56 GMT -5
i,m new to scooter master cylinders...what is a fluid plug
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 23, 2013 18:05:58 GMT -5
i took the brake lines off and blew air thru them ..seems ok but absolutely no fluid will come out of the new master cylinders at the brake line hole when you pump them not even a drop
|
|
New Rider
Currently Offline
Posts: 14
Likes: 0
Joined: Jun 23, 2013 16:08:30 GMT -5
|
Post by digger350 on Jun 23, 2013 16:25:03 GMT -5
i,m having a of a time with the brakes on my 2006 tank touring 150 ..when i got it out of the garage in spring both front and back brakes were locked up ,would,nt move a inch,i had to take the brake lines off at the calipars to get it to roll...when i took the lines off i couldnt see but a drip or so of brake fluid come out...i,ve put new brake calipars on front and back ..new master cylinders front and back and still cant get any fluid going to the calipars ...dont know if i got bad master cylinders from scappydogscooters or what ..with the master cylinders off when i pump the levers no fluid comes out ..does that mean the new master cylinders are bad ?havent been able to ride all spring yet...getting frustrated
|
|
