Freshman Rider
Currently Offline
Posts: 59
Likes: 3
Joined: Mar 2, 2016 22:49:27 GMT -5
|
Post by johnathonkreider on Nov 3, 2016 21:38:17 GMT -5
Hey everyone! Kreider here. I almost got hit by a car turing left at a green light because they didn't see me , so I'm putting in some new headlight bulbs into my 2007 roketa 150cc. I was wondering if you have any recommendations on the best bulbs to buy for them. I'd personally love some LED bulbs (small profile+big lights= better profile), but I'm open to anything. The kind hat I need are 3 prong plug-in style, 12V 18/18W. Let me know what you think are the best ones! I'm curious to find out.
|
|
|
Post by rockynv on Nov 4, 2016 3:45:01 GMT -5
I wear a highly reflective silver riding jacket called a Silver Ignitor due to the way its mesh fabric reflects lights. Upgrading to a brighter headlight many times has the opposite effect than you are desiring and can make you less visible plus depending on the bike can generate enough heat to damage the lamp housing reducing its light output. In a halogen similar to the original you may be able to find the same bulb in a 20 or 22 watts and get away with that however the extra heat may over the long term flake the silvering off the reflector or cloud the lens on the lamp housing.
You will probably have to modify the lamp housing and go with something like an H13 hi/low LED bulb to stay within the 18/20 watts that the 150 is currently setup to support and keep the heat down however there would have to be enough room behind the lamp housing for the heat sink and fan needed by most LED bulb assemblies. Wiring would likely need to be modified to support the H13 bulb.
I would consider getting a more reflective riding jacket with CE3 armor, a more reflective white helmet and better reflectors on the front and sides of the bike or better still replace them with led accent lights or strip lights. Walmart has a good selection of them for low cost.
|
|
Freshman Rider
Currently Offline
Posts: 59
Likes: 3
Joined: Mar 2, 2016 22:49:27 GMT -5
|
Post by johnathonkreider on Nov 4, 2016 11:02:01 GMT -5
I see what you mean. Good idea! I don't really care about cosmetics of a bike (bobber style looks good to me, honestly) so I'll get some reflective tape and cover the dagum thing in it.
I'll look into what you said about those lights. Thank you!
Anyone else is welcome to reply.
|
|