New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Jul 22, 2016 10:35:38 GMT -5
|
Post by rcorwin3 on Jul 22, 2016 12:20:45 GMT -5
hello all,
I am currently driving a TaoTao ATM 50 and it has given me pretty good ser ice for the last 2 1/2 years but it is starting to have some issues with it especially with the vacuum. It has a PAIR on it.
Anyway, I am looking at a TaoTao EVO 50. I know that I need to upgrade almost right away the fuel and vacuum lines, CDI and the plug, wire and coil.
I watched a vid on youtube this morning and the guy said it didn't like wet weather because the water gets into the connectors. Really didn't want to hear that because I ride all year round except for when it snows or ices up.....
If that is the case could I just tape the connections with a good electrical tape?
Is there anything else that you can think of that I need to upgrade?
I have a new Keihin carb for it already.
Many thanks in advance to all who share their wisdom.
rik
|
|
|
Post by cyborg on Jul 22, 2016 13:26:44 GMT -5
I'd put dielectric grease in the connectors then tape them off,,,
|
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Jul 22, 2016 10:35:38 GMT -5
|
Post by rcorwin3 on Jul 22, 2016 15:05:12 GMT -5
Great idea Cyborg!! Many thanks!
rik
|
|
New Rider
Currently Offline
Posts: 10
Likes: 0
Joined: May 31, 2016 19:37:11 GMT -5
|
Post by badpumpkin on Jul 24, 2016 21:03:02 GMT -5
Dielectric grease only on the outside NEVER on metal to metal , metal to metal requires conductive silicone.Look up the definition of dielectric. Before you buy plug, wires, coil, etc., look into coil on plug, it works GREAT.
|
|
|
Post by mftic on Jul 25, 2016 10:02:02 GMT -5
I could go on but... Conductive greases should specifically match materials being clamped. Conductive greases should never be used in electrical connectors with multiple terminals. Conductive greases should only be used in connections that are well-isolated from connections with differing voltages, and never in high voltage connections.
I know the bold part is common sense..but you know..LOL
|
|
New Rider
Currently Offline
Posts: 7
Likes: 1
Joined: Jul 22, 2016 10:35:38 GMT -5
|
Post by rcorwin3 on Jul 25, 2016 17:37:39 GMT -5
BadPumpkin, Please forgive if I sound contary but I have used dielectric grease for years on metal to metal connectors especially concerning moisture conditions and never had an issue. Even though people have told me that it is non-conductive (and I know that statement is true) it does conduct when metal on metal. However I do thank you for your advice! Many thanks rik
|
|