Freshman Rider
Currently Offline
Posts: 69
Likes: 0
Joined: Apr 24, 2016 8:27:05 GMT -5
|
Post by 926am on Jun 5, 2016 10:27:47 GMT -5
Just buttoned up a CF250 and seem to be leaking coolant out the head gasket area. (All new gaskets) Checked all my fasteners, found 2 on the cam gear side that weren't torqued. Tightened them, but not much better. Before I rebuild, is there anything I should look for that may also have contributed to the leakage? Thx.
|
|
|
Post by crawford on Jun 5, 2016 12:10:36 GMT -5
when you had head off did you put a flat edge across it to make sure it was flat ? The head my be wrapped only guessing but it is the only conclusion I could come up with.
|
|
Freshman Rider
Currently Offline
Posts: 69
Likes: 0
Joined: Apr 24, 2016 8:27:05 GMT -5
|
Post by 926am on Jun 7, 2016 16:00:00 GMT -5
No, I didnt check that (brand new head.) I'll check it when it comes off. Good suggestion.
|
|