Freshman Rider
Currently Offline
Posts: 90 
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Apr 13, 2016 23:02:49 GMT -5
Scooter starts on 1-2 kick. But not powerful enough for starting engine?
I use it as a primer due too just not enough turn ratio on high compression piston do they make high torue starters? If i can get a good enough starter i plan on deleting the kick starter.
|
|
Freshman Rider
Currently Offline
Jonway Madness YY50QT-31 2014 (now made of more replacement parts than original)
Posts: 62
Likes: 3
Joined: Oct 30, 2014 15:22:20 GMT -5
|
Post by username on Apr 14, 2016 3:08:05 GMT -5
i would always keep the kick start as a back up! its not exactly taking up much room is it? a high torque starter (if they exist and im sure they dont as i was trying to source one a few months ago ) will draw more power you dont want to be stuck at the side of the road wishing you kept the kick start on.
i had same issue a few months ago for me it was a bad coil, water had got in and so the spark wasnt very strong while using the starter.
i would love one myself if you manage to find one but i spent a couple of hours searching and couldnt find one...
|
|
|
|
Post by onewheeldrive on Apr 14, 2016 4:35:11 GMT -5
They make high-torque starters for scooters. I'd suggest checking the banner ads at the top of this page when looking for parts because both, www.partsforscooters.com and www.scrappydogscooters.com, have them for the 150cc Chinese engines. Scrappy also has one for the 139qmb engines. What kind of engine and/or scooter do both of you have? It's helps us help you (faster) knowing that information upfront---I'm sure not every scooter has high torque starters available, but since Chinese scooters are so common I thought I'd throw that out there. That's why I have my scooter's make, model, and engine in my signature so people know what they're dealing with. Although some "mobile" versions of websites don't show signatures and that's why, if I'm on my phone, I click the "desktop" tab at the bottom of any page of this site to double check people's sigs. I know a couple people on here have upgraded to bigger gauge wire for the starter and battery and had good results by doing that alone. I thought about doing that myself and I may this year. |
|
Freshman Rider
Currently Offline
Jonway Madness YY50QT-31 2014 (now made of more replacement parts than original)
Posts: 62
Likes: 3
Joined: Oct 30, 2014 15:22:20 GMT -5
|
Post by username on Apr 14, 2016 9:00:44 GMT -5
im no longer facing the problem after replacing my coil so i dont need any help, just putting my experience out there incase it helped the guy.
im in britain and sourcing one over here has been more difficuly but as i said i no longer need one.
|
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Apr 14, 2016 10:12:09 GMT -5
i would always keep the kick start as a back up! its not exactly taking up much room is it? a high torque starter (if they exist and im sure they dont as i was trying to source one a few months ago ) will draw more power you dont want to be stuck at the side of the road wishing you kept the kick start on. i had same issue a few months ago for me it was a bad coil, water had got in and so the spark wasnt very strong while using the starter. i would love one myself if you manage to find one but i spent a couple of hours searching and couldnt find one... If i dont finish this engine work my bodies gonna fall apart too old to keep pulling plastics... What about the headlight and dash circuit? Turn signals work, horn works, but why does the gauge accessory lights and headlight work last item wired up was the enruchner. |
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Apr 14, 2016 10:13:50 GMT -5
im no longer facing the problem after replacing my coil so i dont need any help, just putting my experience out there incase it helped the guy. im in britain and sourcing one over here has been more difficuly but as i said i no longer need one. Can a bad coil create run on and no poqee to the head lights? |
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Apr 14, 2016 10:20:55 GMT -5
They make high-torque starters for scooters. I'd suggest checking the banner ads at the top of this page when looking for parts because both, www.partsforscooters.com and www.scrappydogscooters.com, have them for the 150cc Chinese engines. Scrappy also has one for the 139qmb engines. What kind of engine and/or scooter do both of you have? It's helps us help you (faster) knowing that information upfront---I'm sure not every scooter has high torque starters available, but since Chinese scooters are so common I thought I'd throw that out there. That's why I have my scooter's make, model, and engine in my signature so people know what they're dealing with. Although some "mobile" versions of websites don't show signatures and that's why, if I'm on my phone, I click the "desktop" tab at the bottom of any page of this site to double check people's sigs. I know a couple people on here have upgraded to bigger gauge wire for the starter and battery and had good results by doing that alone. I thought about doing that myself and I may this year. 87 PGO STAR COPY BETTER MADE THEN HONDA AERO my cylinder is based off the  nb50 for the jug which is aero but the case is a late model 86-87 honda aero due to the four bolt intake. Very hard to decither lately ive been concidering pgo upgrades from the new models. Wish i could find a sacrifice new model beater to feed the guts to my old scoot. |
|
|
|
Post by tvnacman on Apr 15, 2016 7:55:08 GMT -5
what kind of cdi are you using?
John
|
|
|
|
Post by rcq92130 on Apr 15, 2016 12:29:33 GMT -5
Hi John!
Did you ever get a chance to look at those 2 CDIs I sent you in December?
|
|
Freshman Rider
Currently Offline
Posts: 90
Likes: 1
Joined: Mar 10, 2016 21:54:19 GMT -5
|
Post by vintagepgogod123 on Apr 16, 2016 14:18:57 GMT -5
what kind of cdi are you using? John ....... AC cdi bare stock for the last 16 years to my knowledge af05e. Fair for now but needs some finer tuning, gas is fine, oiling is good, new lines, oil trans fluid, things of that naturenature area. |
|
nb50 for the jug which is aero but the case is a late model 86-87 honda aero due to the four bolt intake.
