|
|
Post by gy6er on Feb 1, 2016 17:26:23 GMT -5
Anyone have a nice pic of a mounted oil cooler for gy6 150 scoot? Also,maby just advice where to mount and maby the differences in types. NCY should be good at $200.00! And is maintenance any harder. This thread may take some experienced folks. Thanks if you gotta dime!!
|
|
|
|
Post by rcq92130 on Feb 1, 2016 17:43:33 GMT -5
First, instead of going to an NCY cooler, why not get a better one at less cost? (Taida). Second, contact Dan Martin at DANSGARAGETALK.COM for actual expert info, rather than opinions from stupid run-of-the-mill people mike me? Finally, I put mine behind the front wheel, which I believe is the optimal location. Some attach it to the air intake - drawbacks are: (a) hotter air to the air cooling system since the air first passes thru the oil cooler which, believe it or not, throws off a lot of heat; (b) looks kind of funky.  Took the scoot to my muffler guy who, for $10, welded the bracket to the frame so the cooler will never come off unless it's unbolted from the bracket. Had to cut the plastic underpan a bit for the cooler too. Nice, neat unobtrusive ... oil never gets higher than 150 deg (I have a gauge on my dash). I have no idea why some of these pix come out rotated  degrees. In your mind rotate deg left so the cooler is facing to the left (which is toward the front fender) |
|
|
|
Post by rcq92130 on Feb 1, 2016 19:43:05 GMT -5
|
|
|
|
Post by rockynv on Feb 1, 2016 23:50:14 GMT -5
Try holding the cell phone in the landscape position when you snap the pictures. The viewer on the site seems like its not reading orientation correctly unless you choose the view picture option.
|
|
degrees. In your mind rotate 
