New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Mar 30, 2013 17:33:15 GMT -5
|
Post by fattydoodoo on Mar 30, 2013 17:50:16 GMT -5
I took the carb off, soaked it, put it back together, but i have this rubber piece left over. I can not remember where i took it off. It is not from the throttle cable, it came off the carb when i took it apart, it's a little rubber dome thing that looks like the one on the throttle cable. I'm stumped and will not try starting it without putting it back on. Any suggestion will help. Its a Kymco 50cc agilty.
|
|
|
|
Post by justbuggin2 on Mar 30, 2013 19:13:02 GMT -5
pics of the piece and carb will help us
|
|
|
|
Post by alleyoop on Mar 30, 2013 19:17:31 GMT -5
It is probably the rubber cover for the PUMP STEM on the throttle side it is a rubber piece about 3/4 of an inch long ribbed. Alleyoop You can see it here on the right:  |
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Mar 30, 2013 17:33:15 GMT -5
|
Post by fattydoodoo on Apr 3, 2013 13:26:26 GMT -5
Yes you were right. I'm sorry i did not post a pic the Mboard said my iphone pic was too large :/
|
|
..BAD TO THE BONE..