New Rider
Currently Offline
Posts: 27 
Likes: 1
Joined: May 3, 2015 19:35:56 GMT -5
|
Evap removal
by: captjeff60 - Jul 26, 2015 7:26:18 GMT -5
via mobile
Post by captjeff60 on Jul 26, 2015 7:26:18 GMT -5
I have a 2014 Taotao 150 and would like to remove the evap emissions crap, got the pair system figured out, would like help removing evap. Also wondering if the 26 mm carb that scrappy sells would be a benefit  |
|
|
|
Evap removal
by: JoeyBee - Jul 26, 2015 7:47:07 GMT -5
via mobile
Post by JoeyBee on Jul 26, 2015 7:47:07 GMT -5
I have a 2014 Taotao 150 and would like to remove the evap emissions crap, got the pair system figured out, would like help removing evap. Also wondering if the 26 mm carb that scrappy sells would be a benefit Removing the emission stuff is an easy process. Make sure the crank case, valve cover, and gas tank can breath. I sealed the venting port on my gas tank and drilled a small hole on the gas cap. As for the carb, going larger is somewhat debatable. If you have the stock carb that is sealed, it wouldn't hurt. You would get more benefit from making sure it is properly tuned. CVT also. |
|
|
|
Post by pistonguy on Jul 26, 2015 9:25:27 GMT -5
I have a 2014 Taotao 150 and would like to remove the evap emissions crap, got the pair system figured out, would like help removing evap. Also wondering if the 26 mm carb that scrappy sells would be a benefit On That Carb swap, Do you have any Mods such as intake and Free Flow Exh? I had a 26mm laying around and just did a Write up on another Scooter Board, 24mm to 26m Carb Upgrade. Lots of Pics. If you have both Intake and Free Flow Exhaust I would recommend it for the what $54 and change. One of the Most important things to think of on going bigger carb. is keeping the Velocity Up. A big hole dumping into a straw will do no good. With the Exh dumping a bunch more air in without a exh, to get rid of it. Its all about the Combination |
|
|
|
Post by pistonguy on Jul 26, 2015 10:54:59 GMT -5
I have a 2014 Taotao 150 and would like to remove the evap emissions crap, got the pair system figured out, would like help removing evap. Also wondering if the 26 mm carb that scrappy sells would be a benefit On That Carb swap, Do you have any Mods such as intake and Free Flow Exh? I had a 26mm laying around and just did a Write up on another Scooter Board, 24mm to 26m Carb Upgrade. Lots of Pics. If you have both Intake and Free Flow Exhaust I would recommend it for the what $54 and change. One of the Most important things to think of on going bigger carb. is keeping the Velocity Up. A big hole dumping into a straw will do no good. With the Exh dumping a bunch more air in without a exh, to get rid of it. Its all about the Combination In addition I already knew I had to do some Vari. tuning as my RPM's were too high. Then I discovered a fairly significant problem with Header Pipe. With Exh,Fix and 26mm carb pickup up some rpm's. Tore into the Vari. found my belt climb was not for snit, went from 11 gram rollers to 13 gram rollers. This Total pckg of a exh. fix, tune Vari, 26mm carb I went from a Chinese 52mph to a Chinese 65 mph' So maybe real world of 45mph to 55mph, She's a runner |
|
