|
|
Post by florida on Jun 12, 2015 13:52:38 GMT -5
The package says:
.0025"
.003"
.004"
.005"
Is this the right ones? They are sae. I thought everything was metric scooter related.
|
|
|
|
Post by JerryScript on Jun 12, 2015 14:20:40 GMT -5
.005" is about .05mm so you are good to go.
|
|
|
|
Post by pistonguy on Jun 12, 2015 14:22:26 GMT -5
Good to go!
You have what you need.
|
|
|
|
Post by lain on Jun 12, 2015 14:31:18 GMT -5
If you have a 50cc you will most likely only use the 0.003 and/or 0.004
|
|
|
|
Post by onewheeldrive on Jun 13, 2015 0:01:35 GMT -5
Actually .002" is close to .05mm.
.005" is close to .13mm
.0025"= .06mm
.003"= .08mm
.004" .1mm
.005" .13mm
(mm is rounded to the nearest hundredth)
|
|
|
|
Post by florida on Jun 13, 2015 0:12:09 GMT -5
Actually .002" is close to .05mm. .005" is close to .13mm .0025"= .06mm .003"= .08mm .004" .1mm .005" .13mm (mm is rounded up) Shoot! I used this gauge once after i bought the used scooter. It ran much better. Before that the engine was "stopping" after it git to normal temps. So do i need metric .003 and .004? |
|
|
|
Post by onewheeldrive on Jun 13, 2015 0:14:41 GMT -5
Actually .002" is close to .05mm. .005" is close to .13mm .0025"= .06mm .003"= .08mm .004" .1mm .005" .13mm (mm is rounded up) Shoot! I used this gauge once after i bought the used scooter. It ran much better. Before that the engine was "stopping" after it git to normal temps. So do i need metric .003 and .004? No, .003 is inches. The metric equivalent to .003inches is .08mm |
|
|
|
Post by florida on Jun 13, 2015 12:27:32 GMT -5
I cant find a feeler gauge to buy on google or ebay.
Anyone have a link so i can purchase one?
|
|
|
|
Post by murkyapricot on Jun 13, 2015 12:52:00 GMT -5
|
|
|
|
Post by florida on Jun 13, 2015 13:41:23 GMT -5
My package says:
.038mm
.051mm
.063mm
.076mm
.102mm
Is this a desirable gauge set? Will this work for 50cc engine gy6?
|
|
|
|
Post by pistonguy on Jun 13, 2015 13:57:52 GMT -5
Bro, all you need is what you already had the .003 in Inches.
|
|
|
|
Post by florida on Jun 13, 2015 14:13:04 GMT -5
K,
|
|
|
|
Post by dmartin95 on Jun 14, 2015 11:37:28 GMT -5
My package says: .038mm
.051mm.063mm .076mm .102mm Is this a desirable gauge set? Will this work for 50cc engine gy6? If those are what you have, IMO, use the .038 on the intake and .051 on the exhaust. That will be the equivalent of roughly .04/.05 which will work fine on a 50cc. |
|
|
|
Post by florida on Jun 14, 2015 15:56:11 GMT -5
My package says: .038mm
.051mm.063mm .076mm .102mm Is this a desirable gauge set? Will this work for 50cc engine gy6? If those are what you have, IMO, use the .038 on the intake and .051 on the exhaust. That will be the equivalent of roughly .04/.05 which will work fine on a 50cc. Is there any way on itstheride.boards.net to give "respect" points? This is an excellant example of helping another rider! Me being the rider recieving help. Nice post! |
|
|
|
Post by JerryScript on Jun 14, 2015 16:36:36 GMT -5
If those are what you have, IMO, use the .038 on the intake and .051 on the exhaust. That will be the equivalent of roughly .04/.05 which will work fine on a 50cc. Is there any way on itstheride.boards.net to give "respect" points? This is an excellant example of helping another rider! Me being the rider recieving help. Nice post! Click on the bones underneath his username, or click on the like button on the upper right of the post that was helpful. |
|
