Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on May 7, 2015 14:39:53 GMT -5
recently I got an DC voltage regulator and a DC stator. unfortunately I have a white wire on my DC regulator but no white wire on the stator. any idea where I need to hook the white wire from the voltage regulator?
|
|
|
|
Post by tvnacman on May 7, 2015 14:54:56 GMT -5
do you have a picture of the regulator?
|
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on May 7, 2015 15:06:26 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on May 7, 2015 15:14:58 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on May 7, 2015 15:16:04 GMT -5
do you have a picture of the regulator? There is a pic of both |
|
|
|
Post by tvnacman on May 7, 2015 15:58:25 GMT -5
your going to have to probe it.
John
|
|
Freshman Rider
Currently Offline
Posts: 71
Likes: 4
Joined: Mar 30, 2013 15:09:16 GMT -5
|
Post by played1 on May 7, 2015 16:06:02 GMT -5
your going to have to probe it. John  Originally it came out of the ac stator. Sorry. I meant to put I installed a dc stator in place of ac |
|
|
|
Post by keikara on May 7, 2015 21:49:08 GMT -5
May be wrong but it might go to the ignition switch to sense voltage. I had a new pink wire on a new r/r I got and that's where it went. Mine is an ac system so don't know if it would be the same.
|
|
|
|
Post by tvnacman on May 8, 2015 8:16:47 GMT -5
could also be a 12v output when the engine is running.
|
|
|
|
Post by dmartin95 on May 8, 2015 16:17:42 GMT -5
recently I got an DC voltage regulator and a DC stator. unfortunately I have a white wire on my DC regulator but no white wire on the stator. any idea where I need to hook the white wire from the voltage regulator? The white wire feeds your auto enricher and whatever else was on that circuit. It's an AC output. I am unsure of the AC output voltage or if it's regulated. However, I'm 99.9999% sure it's an A/C output for your auto enricher circuit. |
|
|
|
Post by wilds on May 8, 2015 23:32:28 GMT -5
White wire is normaly 12V AC to the headlight
|
|
|
|
Post by steve on May 9, 2015 0:15:55 GMT -5
I'm pretty sure that white wire will measure 12v DC coming out of the regulator when the engine is on. It is probably for the enricher. If you don't need it for the enricher, you can run LED lights off of it. Put a meter on it to make sure, but I'm pretty sure that's what it is.
|
|
