New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Sept 22, 2014 8:13:56 GMT -5
|
Post by phantompizza on Sept 22, 2014 8:22:50 GMT -5
Hello, I own a Roketa mc-31-50 and this is my first scooter. I have absolutely no experience with modding, de-restricting and what not, however, I am very interested in de-restricting in the near future because 30-35 mph feels very dangerous on a 45 mph speed limit area! I would feel more comfortable going at least 40mph at cruise. I'd like to start off with an aftermarket exhaust. What exhaust would fit this Roketa model? The engine is a GY6 model # 139QMB.
My scooter gives off this burning plastic or rubber smell. I don't see anything rubbing against each other. is this normal? The scooter is 4 days old
Also, I'd like to remove the washer spacer in the variator system but I have no experience disassembling an engine, nor do I wish to destroy the engine in an attempt >.< !! what's a reasonable price to have an expert remove the spacer?
|
|
|
Post by alleyoop on Sept 26, 2014 23:33:04 GMT -5
If it is brand new the smell is probably the muffler burning some of the insulation. Concerning the Washer Spacer in the Variator, Most do not have that restriction, so if you cannot see it then it does not have a washer in between the Variaror pulley. A performance exhaust really will not do much for what your wanting.
Where you can get a few more mph on the top end is work with the CVT, lighter weights for more rpms etcc and or a performance Variator which would be a little bigger than the standard ones that come with the scoots. Alleyoop
|
|