New Rider
Currently Offline
Posts: 2 
Likes: 0
Joined: May 30, 2014 10:44:59 GMT -5
|
Post by andrew2132 on May 30, 2014 12:52:35 GMT -5
I have a taotao 150cc scooter and I tried to install a a9 camshaft but the exhaust valve is too tight when I put it in. What do i do?
|
|
|
|
Post by geh3333 on May 30, 2014 20:19:16 GMT -5
Loosen the rocker arms make sure the cam is set right " in time" and set the valves to .004 on each .
|
|
|
|
Post by geh3333 on May 30, 2014 20:21:04 GMT -5
Scrub that , first make sure u have the cam set right " in time " that's your problem . U installed the cam out of time and the valves are hitting the rocker arms causing them to be tight . Or u r in time and just need to adjust the valves.
|
|
|
|
Post by jjoshua20213 on May 30, 2014 23:40:29 GMT -5
If at first you don'tr succeed try, try again. Or just say it.
|
|
Freshman Rider
Currently Offline
Posts: 56
Likes: 0
Joined: Apr 13, 2014 10:14:03 GMT -5
|
Post by craisin on May 31, 2014 5:26:00 GMT -5
|
|
