|
|
Post by UniqueSP on Mar 8, 2014 8:32:42 GMT -5
|
|
|
|
Post by millsc on Mar 8, 2014 17:13:00 GMT -5
I'm curious about this, does it use the 6mm spacer, shaved piston or is it a special jug to give clearance?
|
|
|
|
Post by UniqueSP on Mar 10, 2014 7:39:27 GMT -5
I'm curious about this, does it use the 6mm spacer, shaved piston or is it a special jug to give clearance? The 232cc kit does not use a spacer. The cylinder is actually taller with a kind of built in spacer. No shaving no nothing. Its install and go! You only use the 6mm spacer when installing the 8.2mm crank without the 67mm bbk. |
|
|
|
Post by millsc on Mar 10, 2014 8:56:56 GMT -5
Sounds great trying to decide between this and a 250cc scooter.
|
|
|
|
Post by spandi on Mar 10, 2014 9:22:38 GMT -5
In looking at this the castings and machined parts appear to be beautifully finished (as you would expect for 1500 dollars) ....and speaking of a 250, why didn't they just make this a little bigger?  |
|
|
|
Post by UniqueSP on Mar 10, 2014 9:46:28 GMT -5
In looking at this the castings and machined parts appear to be beautifully finished (as you would expect for 1500 dollars) ....and speaking of a 250, why didn't they just make this a little bigger? Yes the casting of the case and all are amazing quality compared to the OEM crankcases. as for making it a little bigger not sure. this is the biggest you can go on a GY6 150cc engine. |
|
New Rider
Currently Offline
Posts: 1 
Likes: 0
Joined: Sept 27, 2017 5:48:24 GMT -5
|
Post by daddydan88 on Sept 27, 2017 6:00:31 GMT -5
Hey sorry to bother you but I have a 06 150cc gsi moon buggy and was wondering if the 232cc kit would fit and if so would need anything else e.g bigger carb New clutch ect sorry for the silly questions but I'm not really good with bike engines haha
|
|
|
|
Post by UniqueSP on Sept 27, 2017 9:10:34 GMT -5
Wow. You found a old thread from like 3 years ago lol. THis 232cc mounts the same way any other GY6 150cc engine mounts. as for carb. Yes you need a bigger carb from stock. a 30mm to 32mm is recommended like the OKO Flatside carb. and yes a upgraded transmission is recommended. 232cc is the top of the line motor. You want to upgrade everything. BTW this post is so old that i dont sell these anymore and i have a new website.
|
|
|
|
Post by cyborg55 on Oct 1, 2017 21:18:10 GMT -5
Look to martins mopeds for anything Taida,,, talk to dan,, he is the national distributor,,,or go to dans. garage talk forum,,
|
|
SHIPPED USPS PRIORITY To all 50 states and territories. 
degree temp all year round. 
SHIPPED USPS PRIORITY To all 50 states and territories. 
degree temp all year round. 
