|
|
Post by ltdhpp on Sept 19, 2013 17:18:07 GMT -5
Yup - it's worth more in parts than trying to sell it not running. I can't use anything but the tires on my reflex, so it's all for sale. You can see what it looks like and what performance parts are on it in the link in my sig - I'm looking to get half of what anything would cost new, plus shiping. So for example, the $200 NCY CVT kit would be $100 - it's got about 3,000 miles on it but was still all working fine before the motor started acting up. You would get your choice of roller/slider weights with it if I have what you want. I still have the stock parts for anything that got replaced with aftermarket. I do also have various other roller/sliders and a red contra spring for a 150cc, and some rollers and clutch/contra springs for a 50cc (both standard GY6 stuff) I should be stripping it down this weekend, I'd be glad to put up pics of parts you are interested in. Also I am willing to put parts on eBay for your buying security if that concerns you, but the price will go up to cover fees. You don't want any of the body panels, they are all either ugly/broken, have broken tabs, are full of holes from the lights, or a combo of all 4.   |
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 8, 2013 10:42:35 GMT -5
|
Post by chewydbb42091 on Sept 20, 2013 11:40:34 GMT -5
How much for.the seat shipped to 32216.jax fl
|
|
|
|
Post by ltdhpp on Sept 20, 2013 22:03:59 GMT -5
The seat is ripped. I think Scrappy has them for $50
|
|
New Rider
Currently Offline
Posts: 32 
Likes: 3
Joined: Oct 3, 2013 15:57:39 GMT -5
|
Post by creaseuk on Oct 3, 2013 16:02:05 GMT -5
Do You Have an aftermarket exhaust?
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Feb 26, 2013 9:28:14 GMT -5
|
Post by sharks06lly on Oct 3, 2013 16:22:41 GMT -5
i could use multiple things. does it have the electric start housing on the handlebars? if so can you post a pic? what comes in the cvt kit im sure mine would be very similar.
|
|
|
|
Post by ltdhpp on Oct 3, 2013 17:42:32 GMT -5
Do You Have an aftermarket exhaust? Yes! If you have one of these style scooters with a 150cc, it should bolt right on. Both tabs had to be cut off the head pipe like most do, but I will send the bracketry you see in the pic if your scooter is like this one. I used a good NCY head pipe gasket too, it may even be re-usable. The pipe is blue from bending it and grungy from use, but the muffler itself is fairly new and still as nice as in this pic. It has a silencer in it so it has some back-pressure and is not too loud. I would like $50 plus $15 shipping - and other smaller items you might want will be no additional shipping. Everything but the headlight bulbs is still there.   |
|
|
|
Post by ltdhpp on Oct 3, 2013 17:56:14 GMT -5
i could use multiple things. does it have the electric start housing on the handlebars? if so can you post a pic? what comes in the cvt kit im sure mine would be very similar. This has the start button in the plastic clam-shell that houses the instrument cluster. The CVT kit will have everything one off the shelf will and more, but all with about 4,000 miles on it, which isn't bad for Taiwanese parts. It has a complete NCY used-to-be Teflon coated variator, a standard 'blue' NCY performance clutch and clutch bell, ncy performance torque sheave, 1K torque(contra) spring, and the unused torque spring ball bearing cup. I used a Malossi torsion controller in its place, which I will include if its still in good shape. This kit should fit ANY 150cc GY6, long or short case. I also have a red 2k torque spring and various new and used rollers/sliders - I will include any used roller with the kit, new roller sets $5, new slider sets $10. The sliders are generic, but I got a look at two sets with a couple thousand miles on them, and they had very little wear. I'm sure the belt is still usable, its the long-long case size, $5.  |
|
|
|
Post by ltdhpp on Oct 3, 2013 18:20:45 GMT -5
I also have two of these.... One still 'brand' new - $40 plus 10 ship, and one 'installed' (the mounting tab is bent and it's dinged a little)and run for less than one hour - $20 plus 10. The tube for this one got used and will be dirty. My 150 did not like this filter when I tried to run it, but this was before I even knew how to adjust the needle. I wound up just using the tube with a pod filter on it. One of them, I forget which, the filter on the inside of the can is stamped K&N. possibly K&M.... they came from China. The rubber pipe coupler on the end is not included. I do not know what scooters these will fit! Probably just about any 50 or 150. They are a "some modification required to install" deal. Not sure if the filter inside will support a 250 or bigger...  |
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Feb 26, 2013 9:28:14 GMT -5
|
Post by sharks06lly on Oct 3, 2013 21:51:18 GMT -5
dang i figured you were gonna say that lol. someone tried to either steal my scooter or move it and they broke my entire right side electric start housing and my throttle assembly. what did you notice different about the cvt with those performance parts and if you dont mind me asking how heavy are you? i have been wanting to mess with the roller weights but i have been sick with cancer since the beginning of the year and the scooter has been sitting. before it would go to 58 mph with me on it wide open and i weighed 280 at the time
|
|
New Rider
Currently Offline
Posts: 32
Likes: 3
Joined: Oct 3, 2013 15:57:39 GMT -5
|
Post by creaseuk on Oct 4, 2013 15:09:26 GMT -5
I do need more parts- Just text me
|
|
|
|
Post by ltdhpp on Oct 5, 2013 10:27:55 GMT -5
what did you notice different about the cvt with those performance parts and if you dont mind me asking how heavy are you? The CVT kit only improves acceleration and hill climbing. I didn't notice any change in top speed but the larger variator must make up for any top speed loss from the belt gearing changes of the kit. My 150cc went from 0-30 just as quick as my stock 250cc Reflex does, currently. You could get almost the same results by changing everything but the variator itself, but by the time you buy the other pieces you've already paid for the whole kit, and having any quality Taiwanese part is better than stock stuff. I weigh about 230lbs and live in the 'hill city', and this kit definitely made a huge difference. By the time I got the aftermarket exhaust and up-jet done, it was pretty ferocious. I wish it still ran so I could see how it compared to the Reflex at speed... |
|
Freshman Rider
Currently Offline
Posts: 50
Likes: 0
Joined: Feb 25, 2013 22:18:46 GMT -5
|
Post by scootertrash on Oct 17, 2013 20:27:45 GMT -5
Anything wrong with the motor? Maybe just needs top end? I've been looking for one for a rear disc brake
|
|
Freshman Rider
Currently Offline
Posts: 84
Likes: 1
Joined: Feb 27, 2013 9:57:25 GMT -5
|
Post by turtleracer on Oct 27, 2013 13:21:25 GMT -5
Do you still have the frame? If so, is it titled and how much?
-Michael
|
|
|
|
Post by urbanmadness on Nov 9, 2013 12:19:29 GMT -5
I need a rear tail light lense for mine... it's cracked to .... (yeah just got the 250 version of this bike)
|
|
New Rider
Currently Offline
Posts: 11
Likes: 0
Joined: Oct 28, 2013 8:53:49 GMT -5
|
Post by elchulachaser on Nov 9, 2013 15:43:58 GMT -5
Sent a PM...
|
|
