New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 30, 2013 16:55:29 GMT -5
Hi dawgs My issue is when I adjust my air/fuel mixture I have to have it screwed all the way in to get it idle right. What could be the problem? Also when I went to replace the stock head I noticed alot of gas sitting in the intake side between manifold and valve.
|
|
|
Post by alleyoop on Aug 30, 2013 17:13:09 GMT -5
Could be several things, the carb has a Pilot Jet that is to big, or it is sucking in gas from someplace else. Check your vacuum line going to the PETCOCK or FUEL PUMP and see if it is wet. If the Vacuum line is wet replace the PETCOCK or FUEL PUMP. Alleyoop
|
|
New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 30, 2013 19:01:02 GMT -5
Well I have change the fuel pump and lines. It is no longer leaking fuel into manifold. But its the a/f mixture screw that its bothering me. Is it to lean or rich w/airbox still on it.
|
|
New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 30, 2013 19:02:33 GMT -5
The plug looks fine a light brown.
|
|