New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 16
Likes: 0
Joined: Mar 4, 2013 8:42:31 GMT -5
|
Post by nofxortiz on Mar 10, 2013 21:36:16 GMT -5
I just have a question about running a 20mm performance carb with all other components being stock. I intend to install a 80cc BB in the near future but I was thinking I needed to upgrade the carb prior to the BB. My question is will the scoot run appropriately with an upgraded carb and no other upgrades?
Also, im not too sure about order of upgrades, of course i'm concerned with power but I really would like good pop/takeoff speed off the line. Im looking at scrappydog and I see that the he usually recommends carb/air filter/coil as first upgrades, besides this and replacing cluth springs, should I be thinking about something else before the BB?
|
|
|
Post by millsc on Mar 10, 2013 21:38:05 GMT -5
18 19 20mm all ran about the same for me.
|
|
|
Post by millsc on Mar 10, 2013 21:39:51 GMT -5
|
|
New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 16
Likes: 0
Joined: Mar 4, 2013 8:42:31 GMT -5
|
Post by nofxortiz on Mar 10, 2013 21:45:07 GMT -5
18 19 20mm all ran about the same for me. Is a 20mm necessary in conjunction with a BB?
|
|
|
Post by millsc on Mar 10, 2013 21:46:52 GMT -5
it may not be necessary but couldn't hurt, if you can get one for a good price get it.
|
|
New Rider
![*](//storage.proboards.com/forum/images/stars/star_black.png)
Currently Offline
Posts: 16
Likes: 0
Joined: Mar 4, 2013 8:42:31 GMT -5
|
Post by nofxortiz on Mar 10, 2013 21:49:46 GMT -5
it may not be necessary but couldn't hurt, if you can get one for a good price get it. I'm just trying to choose between the 20mm performance carb or the 18mm prejetted as im not sure if i'm going to buy another if a BB is installed, thoughts?
|
|
|
Post by millsc on Mar 10, 2013 21:50:58 GMT -5
the bbk will work fine with either
|
|