|
|
Post by millsc on Aug 15, 2013 10:10:33 GMT -5
I have bought a 60mm bbk, 58.5 ported head, a13 cam, koso variator, 26mm carb, dr pulley sliders, orange cdi and coil and ncy performance manifold. Debating on the 30mm carb and p&p exhaust, my goal is 65 gps, this my first 150 wonder if the mods i have already will get me to 65 or will i have to get the pipe and 30mm carb to reach 65? Was hoping to reach 65 without the pipe to keep the noise down, so i could put in a stereo, and i know there's no need for the 30mm carb without the pipe
|
|
|
|
Post by sailracer on Aug 15, 2013 10:42:40 GMT -5
That pipe is nice! On mine, (of corse only 50cc) it's whisper quiet. you almost don't hear it at all when idling. And with the helmet, you hardly hear it at full throttle.It was even fairly quiet while I was fooling with that BBK.
|
|
|
|
Post by millsc on Aug 15, 2013 10:50:23 GMT -5
hoping to keep it and the 26mm carb, but if i can't reach 65 gps out it goes ^)
|
|
Sophomore Rider
Currently Offline
Posts: 139
Likes: 0
Joined: May 7, 2013 21:44:09 GMT -5
|
Post by david3336 on Aug 15, 2013 19:24:20 GMT -5
i have 2 150s both do 65 with ease heres what i did to both. upjet to 112 mj free flow filter racing cdi (blue) red hot racing coil free flow muffler a9 racing cam big variator racing clutch kevlar belt 15 gram sliders. on one i mixed 12 and 15 gram sliders no bbk at all. one tops out out 68 and one at 75 or lil more oh just good stock carb with adjustable a/f and screws on bottom so could be rejetted
|
|
jet
