New Rider
Currently Offline
Posts: 31
Likes: 0
Joined: Mar 8, 2013 23:10:57 GMT -5
|
Post by 50scoot on Aug 11, 2013 19:02:02 GMT -5
Ok so as I was taking the rear gear case apart and pulled it away, the clutch shaft stayed attached to the scooter and a white nylon washer fell to the ground.
My question is...where does this washer go? It must go in between some gears and the case or something to act like a spacer or something to absorb load shock?
Does anyone know what I'm talking about? I'll try to get a picture up if I can
|
|
|
|
Post by sailracer on Aug 11, 2013 19:04:27 GMT -5
Yes I do. It goes behind the set that you have to press on. it goes between the case and the gearset. its a spacer.
|
|
New Rider
Currently Offline
Posts: 31
Likes: 0
Joined: Mar 8, 2013 23:10:57 GMT -5
|
Post by 50scoot on Aug 11, 2013 19:05:12 GMT -5
We'll I can't figure out how to post pics so just text me if u wanna see a picture
503-989-4947
|
|
New Rider
Currently Offline
Posts: 31
Likes: 0
Joined: Mar 8, 2013 23:10:57 GMT -5
|
Post by 50scoot on Aug 11, 2013 19:13:56 GMT -5
The counter gear set? Closest to the brake drum or closest to the clutch bell?
|
|
|
|
Post by sailracer on Aug 11, 2013 19:48:29 GMT -5
what size motor is it? it goes on the set that you pressed the gear on. You put it in first, between the gearset and the case. Or just put it on the shaft, and then stick the shaft into the bearing.
|
|
|
|
Post by millsc on Aug 11, 2013 20:12:25 GMT -5
I forgot to put it back on last time I upgraded gears no ill effects
|
|
New Rider
Currently Offline
Posts: 31
Likes: 0
Joined: Mar 8, 2013 23:10:57 GMT -5
|
Post by 50scoot on Aug 11, 2013 20:21:08 GMT -5
Oh ok, it's a 139qmb
Thanks for the help!
|
|
|
|
Post by wilds on Aug 12, 2013 0:58:39 GMT -5
|
|
jet
