New Rider
Currently Offline
Posts: 1
Likes: 0
Joined: Aug 3, 2013 15:58:50 GMT -5
|
Post by wolverine on Aug 3, 2013 16:07:08 GMT -5
when i turn the key on i dont get any power at all on my puma amstar 150... i checked the battery voltage as well as the fuse and they are both in great condition. i have no idea what to do. the kick start works fine but the electric won't work at all and my wife cannot use the kick start please help!!!
|
|
|
|
Post by scoots on Aug 3, 2013 17:17:08 GMT -5
look for loose wire in the buttons first then post back
|
|
|
|
Post by scootnwinn on Aug 3, 2013 18:46:27 GMT -5
Locate the solenoid (follow the large red wire from the battery to a little round box with 2 terminals) and jump the 2 terminals with a wire. If it starts then check if there is power to the small wire on it when you push the start button. If there is your solenoid is bad. If there isn't the switch is bad. If jumping the terminals doesn't start it then the starter is bad...
|
|
|
|
Post by jjoshua20213 on Aug 3, 2013 20:06:44 GMT -5
When this happen to me the ignition actually broke and when I turned the key the the piece that turns the engine switch on and off was broken and not moving
|
|
|
|
Post by jerseyboy on Aug 3, 2013 22:29:58 GMT -5
If you have no power going to your dash lights when key is on and no starter,,I assume the ignition switch or killswitch could be bad(or adjacent wire,plugs,connections),,not sure if killswitch kills all power or just ignition though..scoot is out in garage now...Ill check 2 morro.
|
|
|
|
Post by tvnacman on Aug 5, 2013 21:34:26 GMT -5
check the fuse with a meter , they may look good and can be bad .
John
|
|
