|
|
Post by scoots on Jul 31, 2013 21:39:26 GMT -5
can my 50cc that has a shorty pipe use a NCY exhast gasket?
it shows only for the 150cc but my pipe was made for 150cc's
|
|
|
|
Post by jeepsteve92xj on Jul 31, 2013 21:51:20 GMT -5
There should be a gasket between the head and the pipe.
Both of my scooters came from the factory missing that gasket.
|
|
|
|
Post by scoots on Jul 31, 2013 22:41:37 GMT -5
i wana use the 150cc NCY gasket but idk if i can
|
|
Freshman Rider
Currently Offline
Posts: 57
Likes: 0
Joined: Apr 16, 2013 9:39:21 GMT -5
|
Post by frederick on Jul 31, 2013 22:45:34 GMT -5
Oddly enough,my Tao Tao has no exhaust gasket. It dont leak though. Came that way from the factory.
|
|
Sophomore Rider
Currently Offline
Posts: 166
Likes: 0
Joined: Jun 9, 2013 7:36:35 GMT -5
|
Post by freefour1968 on Aug 1, 2013 0:17:24 GMT -5
I use a piece of thick cardboard I cut from a law mower box I had laying around . I inspected it the other day and still working and looked just as good as the day I put it in about 500 Klm ago.
|
|
|
|
Post by scoots on Aug 1, 2013 5:07:46 GMT -5
so it should fit rifght? i have bad leaks i ssmell like exhaust after i ride
|
|
Sophomore Rider
Currently Offline
Posts: 166
Likes: 0
Joined: Jun 9, 2013 7:36:35 GMT -5
|
Post by freefour1968 on Aug 1, 2013 14:11:46 GMT -5
If you have it in hand then just see if it will fit . If you are asking because you are wanting to order it off line then I would say go and get the measurements off you exhaust port .....bolt to bolt and diameter of the outlet port and then see if it matches what they offer . All else fails realy thick cardboard , not like the thin walled stuff from a tv box , works great just be sure to check and retighten the bolts after you start it up and let it warm up and run around the block a couple of times .
|
|
